參數資料
型號： 725
廠商： 3M
文件頁數： 88/88頁
文件大小： 0K
描述： MONITOR WRIST STRAP DUAL COND
標準包裝： 1
類型： 腕帶監視器
使用： 腕帶監視
特點： 連續監視，雙芯系統
電源類型： 9V 電池
包括： 接地線，說明書，固定夾
工具箱： 8507A9622-ND - FIELD SERVICE KIT
其它名稱： 05113855969
7253M
7253M-ND
98079837617
SCP303
7
Section 4.
Installation Under Work
Bench
Fig. 4
The Model 725 can be mounted under
a work bench by securing with two #8
screws (not supplied) through the
mounting hole tabs located on the top
cover.
Note:
Use of the monitor in this way
precludes grounding a work surface
through the snap connector on the
bottom of the monitor. A static control
work surface, if present, would require
grounding separately through an
additional ground cord.
When mounting the Model 725
Monitor under a work bench for non
mobile use, remove the parking clip
(Section 6) from the Model 725
Monitor using a small screwdriver. The
Model 725 Monitor is now ready to
mount.
Position the monitor so that it is
convenient for the operator to plug
their wrist strap ground cord into the
jack on the front of the monitor. It is
recommended that the front face of the
monitor be ush or slightly recessed
from the front edge of the work bench.
Attach the monitor to the work bench
with the screws. It may be necessary
to pre-drill pilot holes for the screws.
Attach the dual conductor ground clip
or each wire of the monitor’s dual
conductor ground cord to a suitable
ground.
Caution
If you decide not to use the dual
conductor ground clip that is
attached to the monitor’s ground
cord in the way described in this
user instruction manual, observe the
following precaution: Attach each of
the two wires of the monitor’s ground
cord to separate ground bonding
points. By attaching the wires to the
same ground but at different physical
locations, the monitor can check for
loose or lost connections.
Use of an optional 3M 3057 Stand-By
Jack at the work station extends the
life of the monitor’s input jack. The
user disconnects the wrist strap
ground cord from the wrist band
and plugs into the 3057 jack which is
mounted at the work station.
Plugging into the 3057 jack prevents
the Model 725 from continuously
alarming when disconnected from the
wrist band.
The system is now ready for use.
相關PDF資料
PDF描述
73859 JACKET W/CUFFS TEAL 6XLARGE
741 FOOTPLATE FOR 740 TESTER
746 CERTIFIED WRIST STRAP TESTER AC CERTIFIED
749 PEDESTAL STAND FOR 3M TESTERS
74ABT162244DGG,518 IC BUFF DVR TRI-ST 16BIT 48TSSOP
相關代理商/技術參數
參數描述
725 BK038 功能描述:COILED CABLE 2 CONDUCTOR RoHS:是 類別:線纜，導線 >> 多芯導線 系列:- 標準包裝:1 系列:* 其它名稱:2131610.00
725 制造商:SLI EBT 功能描述:LAMP T1.3/4 MID.FLANGE 12V 1.2W
725.13.1414 制造商:HUCO 功能描述:COUPLING 3X3 制造商:HUCO 功能描述:COUPLING, 3X3 制造商:HUCO 功能描述:COUPLING, 3X3; Torque:1.46N-m; Overall Length:19.05mm; Coupling Material:Aluminium; External Diameter:12.7mm; Bore Size:3mm; SVHC:No SVHC (19-Dec-2012); Bore Diameter Max:3mm; Bore Diameter Min:3mm; External Diameter:12.7mm; External;RoHS Compliant: NA
725.13.1818 制造商:HUCO 功能描述:COUPLING 4X4 制造商:HUCO 功能描述:COUPLING, 4X4 制造商:HUCO 功能描述:COUPLING, 4X4; Torque:1.4N-m; Overall Length:19.05mm; Coupling Material:Aluminium; External Diameter:12.7mm; Bore Size:4mm; SVHC:No SVHC (19-Dec-2012); Bore Diameter Max:4mm; Bore Diameter Min:4mm; External Diameter:12.7mm; External ;RoHS Compliant: NA
725.13.1820 制造商:HUCO 功能描述:COUPLING 4X5 制造商:HUCO 功能描述:COUPLING, 4X5 制造商:HUCO 功能描述:COUPLING, 4X5; Torque:0.9N-m; Overall Length:19.05mm; Coupling Material:Aluminium; External Diameter:12.7mm; Bore Size:4mm; SVHC:No SVHC (19-Dec-2012); Bore Diameter Max:4mm; Bore Diameter Min:5mm; External Diameter:12.7mm; External ;RoHS Compliant: NA
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*