Rev.1.01 Aperture delays One of the most difficult tasks in designing a digital camera is optimizing the pixel timing for the CCD, " />
參數資料
型號： XRD98L63ZEVAL
廠商： Exar Corporation
文件頁數： 19/41頁
文件大小： 0K
描述： EVAL BOARD FOR XRD98L63
標準包裝： 1
系列： *
XRD98L63
26
Rev.1.01
Aperture delays
One of the most difficult tasks in designing a digital
camera is optimizing the pixel timing for the CCD, CDS
and ADC. We have included the programmable aper-
ture delay function to help simplify this job.
There are three serial interface registers, SBLKdly,
SPIXdly, and ADCdly, used to program the aperture
delays. Each register is divided into 2 or 3 delay
parameters.
The delays are added to the clock signals after the
polarity control. This means the definition of leading
edge and trailing edge of the external clock signals
(SBLK, SPIX & ADCLK) depends on the polarity
control bit for each clock. For the default case,
SBLKpol=0, SPIXpol=0 & ADCpol=0, the leading edge
is the falling edge and the trailing edge is the rising
edge.
The SBLKdly register is divided into two 3-bit delay
parameters, SBdly[2:0] and SBdly[5:3]. Each can add
from 0 to 7 ns of delay in 1 ns steps.
SBdly[2:0] controls the delay added to the leading
edge of SBLK. This positions the rising edge of the
internal signal
φ1.
SBdly[5:3] controls the delay added to the trailing edge
of SBLK. This positions the falling edge of the internal
signal
φ1.
The SPIXdly register is divided into three 3-bit delay
parameters, SPdly[2:0], SPdly[5:3] and SPdly[8:6].
Each can add from 0 to 7 ns of delay in 1 ns steps.
SPdly[2:0] controls the delay added to the leading
edge of SPIX. This positions the rising edge of the
internal signal
φ2.
SPdly[5:3] controls the delay added to the trailing edge
of SPIX. This positions the falling edge of the internal
signal
φ2.
SPdly[8:6] is only used when SPIXopt=1. It controls
the delay from the trailing edge of SBLK to the rising
edge of the internal signal
φ2. This delay is in addition
to SBdly[5:3], the SBLK trailing edge delay.
The ADCdly register is divided into two 4-bit delay
parameters, ADCdly[3:0] and ADCdly[7:5]. Each can
add from 0 to 7.5 ns of delay in 0.5 ns steps.
ADCdly[3:0] controls the delay added to the leading
edge of ADCLK. This positions the falling edge of the
internal signal
φ4.
ADCdly[7:4] controls the delay added to the trailing
edge of ADCLK. This positions the rising edge of the
internal signal
φ4.
相關PDF資料
PDF描述
RCB13DHLN CONN EDGECARD 26POS DIP .050 SLD
P1330R-104K INDUCTOR POWER 100.0UH SMD
VI-270-EY CONVERTER MOD DC/DC 5V 50W
0210490388 CABLE JUMPER 1.25MM .030M 32POS
VE-20X-EY CONVERTER MOD DC/DC 5.2V 50W
相關代理商/技術參數
參數描述
XRDAN27 制造商:EXAR 制造商全稱:EXAR 功能描述:Compensating for Zero Order Hold Effects
XRDAN28 制造商:EXAR 制造商全稱:EXAR 功能描述:Frequency Response Effects of Overampling and Averaging on A/D Output Data
XRDAN29 制造商:EXAR 制造商全稱:EXAR 功能描述:Criteria for Accurate Sampling of Analog Signals
XRDAN30 制造商:EXAR 制造商全稱:EXAR 功能描述:CMOS Current Output D/A Converter Design Concepts for Wide Bandwidth Applications
XR-E 制造商:CREE 制造商全稱:Cree, Inc 功能描述:XLamp XR-E and XR-C LED Binning and Labeling
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*