參數資料
型號: W29GL064CB7S
廠商: WINBOND ELECTRONICS CORP
元件分類: PROM
英文描述: 64M X 1 FLASH 3V PROM, 70 ns, PDSO48
封裝: 12 X 20 MM, GREEN, TSOP-48
文件頁數: 11/65頁
文件大?。?/td> 648K
代理商: W29GL064CB7S
W29GL064C
Publication Release Date: January 18, 2011
13
Preliminary - Revision B
7.2.17.3
Read Silicon Device ID Code
To verify the Silicon Device ID Codes, execute a Read Operation with VHH applied to the A9 pin and
address pins A6, A3, A2, A1, and A0 have several bit combinations to return the Winbond Device ID
codes of 7Eh, 21h or 01h, which is shown on the data bits DQ[7:0]. See Table 7-2.
7.2.17.4
Read Indicator Bit DQ7 for Security Sector High and Low Address
To verify that the Security Sector has been factory locked, execute a Read Operation with VHH applied
to A9, address pins A6, A3, and A2 are held Low, and address pins A1 and A0 are held High. If the
Security Sector has been factory locked, the code 9Ah(Highest Address Sector) or 8Ah(Lowest
Address Sector) will be shown on the data bits DQ[7:0]. Otherwise, the factory unlocked code of
1Ah(H)/0A(L) will be shown.
7.2.18 Automatic Select Operations
The Automatic Select instruction show in Table 7-13 can be executed if the device is in one of the
following modes; Read, Program Suspended, Erase-Suspended Read, or CFI. At which time the user
can issue (two unlock cycles followed by the Automatic Select instruction 90h) to enter Automatic
Select mode. Once in the Automatic Select mode, the user can query the Manufacturer ID, Device ID,
Security Sector locked status, or Sector protected status multiple times without executing the unlock
cycles and a Automatic Select instruction (90h) again.
Once in Automatic Select mode, executing a Reset instruction (F0h) will return the device back to the
valid mode from which it left when the Automatic Select mode was first executed.
Another way previously mentioned to enter Automatic Select mode is to use one of the bus operation
shown Table 7-2 in Device Bus Operation. Once the high voltage (VHH) is removed from the A9 pin,
the device will return back to the valid mode from which it left when the Automatic Select mode was
first executed.
7.2.19
Automatic Select Instruction Sequence
Accessing the manufacturer ID, device ID, and verifying whether or not secured silicon is locked and
whether or not a sector protected is the purpose of Automatic Select mode. There are four instruction
cycles that comprise the Automatic Select mode. The first two cycles are write unlock commands,
followed by the Automatic Select instruction (90h). The fourth cycle is a read cycle, and the user may
read at any address any number of times without entering another instruction sequence. To exit the
Automatic Select mode and back to read array, the Reset instruction is necessary. No other
instructions are allowed except the Reset Instruction once Automatic Select mode has been selected.
Refer to the following table for more detailed information.
Address
Data (hex)
Representation
Manufacturer ID
Word
X00
01
Byte
X00
01
Device ID
H/L
Word
X01/0E/0F
227E/220C/2201
Byte
X02/1C/1E
7E/0C/01
T/B
Word
X01/0E/0F
227E/2210/2201(T)/2200(B)
Byte
X02/1C/1E
7E/10/01(T)/00(B)
Secure Silicon
Word
X03
9A/1A(H)
Factory locked/unlocked
8A/0A(L)
Byte
X06
9A/1A(H)
Factory locked/unlocked
8A/0A(L)
Sector Protect Verify
Word (Sector address) X02
00/01
Unprotected/protected
Byte Sector address) X04
00/01
Unprotected/protected
Table 7-9
Auto Select for MFR/Device ID/Secure Silicon/Sector Protect Read
相關PDF資料
PDF描述
W29GL128CL1B 128M X 1 FLASH 3V PROM, 100 ns, PBGA64
W29N102CP-55B 64K X 16 FLASH 3.3V PROM, 55 ns, PQCC44
W2D15A250A 1 FUNCTIONS, 50 V, FERRITE CHIP
W1D15A270A 1 FUNCTIONS, 50 V, FERRITE CHIP
W2Z1M72SJ38BC 1M X 72 MULTI DEVICE SRAM MODULE, 3.8 ns, PBGA209
相關代理商/技術參數
參數描述
W29GL064CH7B 制造商:WINBOND 制造商全稱:Winbond 功能描述:64M-BIT 3.0-VOLT PARALLEL FLASH MEMORY WITH PAGE MODE
W29GL064CH7T 制造商:Winbond Electronics Corp 功能描述:IC FLASH 64MBIT 70NS 56TSOP
W29GL064CL7B 制造商:WINBOND 制造商全稱:Winbond 功能描述:64M-BIT 3.0-VOLT PARALLEL FLASH MEMORY WITH PAGE MODE
W29GL064CL7T 制造商:WINBOND 制造商全稱:Winbond 功能描述:64M-BIT 3.0-VOLT PARALLEL FLASH MEMORY WITH PAGE MODE
W29GL064CT7A 功能描述:IC FLASH 64MBIT 70NS 48TFBGA RoHS:是 類別:集成電路 (IC) >> 存儲器 系列:- 標準包裝:1 系列:- 格式 - 存儲器:閃存 存儲器類型:閃存 - NAND 存儲容量:4G(256M x 16) 速度:- 接口:并聯 電源電壓:2.7 V ~ 3.6 V 工作溫度:0°C ~ 70°C 封裝/外殼:48-TFSOP(0.724",18.40mm 寬) 供應商設備封裝:48-TSOP I 包裝:Digi-Reel® 其它名稱:557-1461-6