
APPENDIX A DEVELOPMENT TOOLS
Preliminary User’s Manual U17790EJ1V0UD
1082
Figure A-3. System Configuration (QB-V850ESSX2 Used) (2/2)
Notes 1. Obtain the device file from the NEC Electronics website.
http://www.necel.com/micro/ods/eng/index.html
2. Depending on the ordering number, supplied with the device.
When QB-V850ESSX2-ZZZ is ordered
The exchange adapter and the target connector are not supplied.
When QB-V850ESSX2-S144GJ is ordered
The QB-144GJ-EA-01S and QB-144GJ-TC-01S are supplied.
When QB-V850ESSX2-T144GJ is ordered
The QB-144GJ-EA-01T, QB-144GJ-YQ-01T, and QB-144GJ-NQ-01T are supplied.
3. When using both <9> and <10>, the order between <9> and <10> is not cared.
<5> QB-V850ESSX2
Note
In-circuit emulator
The in-circuit emulator serves to debug hardware and software when developing
application systems using a V850ES/SJ3 product. It corresponds to the integrated
debugger ID850QB. This emulator should be used in combination with a power
supply unit and emulation probe. Use USB to connect this emulator to the host
machine.
<3> Interface cable
Cable to connect the host machine and the QB-V850ESSX2.
<4> AC adapter
100 to 240 V can be supported by replacing the AC plug.
<8> QB-144GJ-EA-01S
QB-144GJ-EA-01T
Exchange adapter
Adapter to perform pin conversion.
<9> QB-144-CA-01S
Check pin adapter
Adapter used in waveform monitoring using the oscilloscope, etc.
<10> QB-144-SA-01S
QB-144GJ-YS-01T
Space adapter
Adapter to adjust the height.
<12> QB-144GJ-MA-01S
QB-144GJ-HQ-01T
Mount adapter
Adapter to mount the V850ES/SJ3 with socket.
<13> QB-144GJ-TC-01S
QB-144GJ-NQ-01T
Target connector
Connector to solder on the target system.
Note QB-V850ESSX2 is supplied with a power supply unit, USB interface cable, and simple programmer PG-FPL.
It is also supplied with integrated debugger ID850QB as control software.
Remark
The numbers in the square brackets correspond to the numbers in Figure A-3.