參數資料
型號： ST52510F3M6
廠商： STMICROELECTRONICS
元件分類： 微控制器/微處理器
英文描述： MICROCONTROLLER, PDSO20
封裝： SOP-20
文件頁數： 12/136頁
文件大?。?/td> 3335K
代理商： ST52510F3M6
Obsolete
Product(s)
- Obsolete
Product(s)
16.2 Absolute Maximum Ratings
Stresses above those listed as “absolute maximum ratings” may cause permanent damage to the device.
This is a stress rating only. Functional operation of the device under these conditions is not implied.
Exposure to maximum rating conditions for extended periods may affect device reliability.
Table 16.1 Voltage Characteristics
Symbol
Ratings
Max Values
Unit
VDD-VSS
Supply voltage
6.5
V
VIN
Input voltage on any pin 1) 2)
VSS-0.3 to VDD+0.3
VDESD
Electrostatic discharge voltage
2000
Table 16.2 Current Characteristics
Symbol
Ratings
Max Values
Unit
IVDD
Total current in VDD power lines (source)3)
100
mA
IVSS
Total current in VSS ground lines (sink)3)
100
IIO
Output current sunk by any standard I/O and control pin
20
Output current source by any I/Os and control pin
-20
Injected current on RESET pin
± 5
IINJ(PIN)2)
Injected current on OSCin and OSCout pins
± 5
Injected current on any other pin 4)
± 5
ΣIINJ(PIN)
Total Injected current (sum of all I/O and control pins) 4)
± 20
Table 16.3 Thermal Characteristics
Symbol
Ratings
Max Values
Unit
TSTG
Storage temperature range
-65 to +150
° C
TJ
Maximum junction temperature
150
Notes:
1. Connecting I/O Pins directly to VDD or VSS could damage the device if the unintentional internal reset
is generated or an unexpected change of I/O configuration occurs (for example, due to the corrupted
program counter). In order to guarantee safe operation, this connection has to be performed via a pull-
up or pull-down resistor (typical: 10K Ω for I/Os). Unused I/O pins must be tied in the same manner to
VDD or VSS according to their reset configuration.
2. When the current limitation is not possible, the VIN absolute maximum rating must be respected, other-
wise refer to IINJ(PIN) specification. A positive injection is induced by VIN>VDD while a negative injec-
tion is induced by VIN<VSS to IINJ(PIN) specification. A positive injection is VIN>VDD while a negative
injection is induced by VIN<VSS. Data by design.
3. All power (VDD) and ground (VSS) lines must always be connected to the external supply.
4. When several inputs are submitted to a current injection, the maximum
ΣIINJ(PIN) is the absolute sum of
the positive and negative injected currents (instantaneous values). Data by design.
相關PDF資料
PDF描述
ST52E430B/D 8-BIT, UVPROM, 20 MHz, MICROCONTROLLER, CDIP32
ST52F510F1M6 8-BIT, FLASH, 24 MHz, MICROCONTROLLER, PDSO20
ST52F510G0B6 8-BIT, FLASH, 24 MHz, MICROCONTROLLER, PDIP28
ST52F513F0M6 8-BIT, FLASH, 24 MHz, MICROCONTROLLER, PDSO20
ST52F513F1B6 8-BIT, FLASH, 24 MHz, MICROCONTROLLER, PDIP20
相關代理商/技術參數
參數描述
ST52510G2 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-BIT ICU WITH 10-BIT ADC. TWO TIMERS/PWM. I2C. SPI. SCI. UP TO 8K FLASH
ST52510G3 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-BIT ICU WITH 10-BIT ADC. TWO TIMERS/PWM. I2C. SPI. SCI. UP TO 8K FLASH
ST52510K2 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-BIT ICU WITH 10-BIT ADC. TWO TIMERS/PWM. I2C. SPI. SCI. UP TO 8K FLASH
ST52510K3 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-BIT ICU WITH 10-BIT ADC. TWO TIMERS/PWM. I2C. SPI. SCI. UP TO 8K FLASH
ST52510Y2 制造商:未知廠家 制造商全稱:未知廠家 功能描述:8-BIT ICU WITH 10-BIT ADC. TWO TIMERS/PWM. I2C. SPI. SCI. UP TO 8K FLASH
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*