參數資料
型號： SPC5200CVR400
廠商： Freescale Semiconductor
文件頁數： 72/80頁
文件大?。?/td> 0K
描述： IC MPU 32BIT 400MHZ 272-PBGA
標準包裝： 40
系列： MPC52xx
處理器類型： 32-位 MPC52xx PowerPC
速度： 400MHz
電壓： 1.5V
安裝類型： 表面貼裝
封裝/外殼： 272-BBGA
供應商設備封裝： 272-PBGA（27x27）
包裝： 托盤
MPC5200 Data Sheet, Rev. 4
System Design Information
Freescale Semiconductor
74
5.3.2
Pull-up Requirements for the PCI Control Lines
If the PCI interface is NOT used (and internally disabled) the PCI control pins must be terminated as
indicated by the PCI Local Bus specification [4]. This is also required for MOST/Graphics and Large Flash
Mode.
PCI control signals always require pull-up resistors on the motherboard (not the expansion board) to
ensure that they contain stable values when no agent is actively driving the bus. This includes
PCI_FRAME, PCI_TRDY, PCI_IRDY, PCI_DEVSEL, PCI_STOP, PCI_SERR, PCI_PERR, and
PCI_REQ.
5.3.3
Pull-up/Pull-down Requirements for MEM_MDQS pins
(SDRAM)
The MEM_MDQS[3:0] signals are not used with SDR memories and require pull-up or pull-down
resistors in SDRAM mode.
5.4
JTAG
The MPC5200 provides the user an IEEE 1149.1 JTAG interface to facilitate board/system testing. It also
provides a Common On-Chip Processor (COP) Interface, which shares the IEEE 1149.1 JTAG port. The
COP Interface provides access to the MPC5200's imbedded Freescale (formerly Motorola) MPC603e
G2_LE processor. This interface provides a means for executing test routines and for performing software
development & debug functions.
5.4.1
JTAG_TRST
Boundary scan testing is enabled through the JTAG interface signals. The JTAG_TRST signal is optional
in the IEEE 1149.1 specification but is provided on all processors that implement the PowerPC
architecture. To obtain a reliable power-on reset performance, the JTAG_TRST signal must be asserted
during power-on reset.
5.4.1.1
JTAG_TRST and PORRESET
The JTAG interface can control the direction of the MPC5200 I/O pads via the boundary scan chain. The
JTAG module must be reset before the MPC5200 comes out of power-on reset; do this by asserting
JTAG_TRST before PORRESET is released.
For more details refer to the Reset and JTAG Timing Specification.
相關PDF資料
PDF描述
SPC5517GAMMG66 IC MCU 32B 1.5MB FLASH 208MAPBGA
SPC5604PGF0MLQ6 IC MCU 32BIT 512KB FLASH 144LQFP
SST89C58RC-40-C-QIF IC MCU 8BIT FLASH 40WQFN
SST89E54RC-33-C-PIE IC MCU 8BIT 17KB FLASH 40PDIP
SST89E58RD2-40-I-TQJE IC MCU 8BIT FLASH 44TQFP
相關代理商/技術參數
參數描述
SPC5200CVR400B 功能描述:微處理器 - MPU HABANERO AUTO PBFREE RoHS:否 制造商:Atmel 處理器系列:SAMA5D31 核心:ARM Cortex A5 數據總線寬度:32 bit 最大時鐘頻率:536 MHz 程序存儲器大小:32 KB 數據 RAM 大小:128 KB 接口類型:CAN, Ethernet, LIN, SPI,TWI, UART, USB 工作電源電壓:1.8 V to 3.3 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:FBGA-324
SPC5200CVR400BR2 功能描述:微處理器 - MPU HABANERO AUTO PB FREE RoHS:否 制造商:Atmel 處理器系列:SAMA5D31 核心:ARM Cortex A5 數據總線寬度:32 bit 最大時鐘頻率:536 MHz 程序存儲器大小:32 KB 數據 RAM 大小:128 KB 接口類型:CAN, Ethernet, LIN, SPI,TWI, UART, USB 工作電源電壓:1.8 V to 3.3 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:FBGA-324
SPC5200CVR400R2 功能描述:IC MPU 32BIT 400MHZ 272-PBGA RoHS:是 類別:集成電路 (IC) >> 嵌入式 - 微處理器 系列:MPC52xx 標準包裝:2 系列:MPC8xx 處理器類型:32-位 MPC8xx PowerQUICC 特點:- 速度:133MHz 電壓:3.3V 安裝類型:表面貼裝 封裝/外殼:357-BBGA 供應商設備封裝:357-PBGA（25x25） 包裝:托盤
SPC5200VVR266B 制造商:FREESCALE 制造商全稱:Freescale Semiconductor, Inc 功能描述:SDRAM/DDR Memory Controller
SPC5293 制造商:SPC Multicomp 功能描述:D Subminiature Gender Changer Convert Fr
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*