參數資料
型號： SC16C550IB48,128
廠商： NXP SEMICONDUCTORS
元件分類： 微控制器/微處理器
英文描述： 1 CHANNEL(S), 3M bps, SERIAL COMM CONTROLLER, PQFP48
封裝： 7 X 7 MM, 1.40 MM HEIGHT, PLASTIC, MS-026, SOT-313-2, LQFP-48
文件頁數： 3/52頁
文件大?。?/td> 639K
代理商： SC16C550IB48,128
Philips Semiconductors
SC16C550
UART with 16-byte FIFO and IrDA encoder/decoder
Product data
Rev. 05 — 19 June 2003
11 of 52
9397 750 11619
Koninklijke Philips Electronics N.V. 2003. All rights reserved.
6.3 Autoow control (see Figure 5)
Autoow control is comprised of auto-CTS and auto-RTS. With auto-CTS, the CTS
input must be active before the transmitter FIFO can emit data. With auto-RTS, RTS
becomes active when the receiver needs more data and noties the sending serial
device. When RTS is connected to CTS, data transmission does not occur unless the
receiver FIFO has space for the data; thus, overrun errors are eliminated using
UART 1 and UART 2 from a SC16C550 with the autoow control enabled. If not,
overrun errors occur when the transmit data rate exceeds the receiver FIFO read
latency.
6.3.1
Auto-RTS (see Figure 5)
Auto-RTS data ow control originates in the receiver timing and control block (see
Figure 1 “Block diagram.”) and is linked to the programmed receiver FIFO trigger
level. When the receiver FIFO level reaches a trigger level of 1, 4, or 8 (see Figure 7),
RTS is de-asserted. With trigger levels of 1, 4, and 8, the sending UART may send an
additional byte after the trigger level is reached (assuming the sending UART has
another byte to send) because it may not recognize the de-assertion of RTS until
after it has begun sending the additional byte. RTS is automatically reasserted once
the RX FIFO is emptied by reading the receiver buffer register. When the trigger level
is 14 (see Figure 8), RTS is de-asserted after the rst data bit of the 16th character is
present on the RX line. RTS is reasserted when the RX FIFO has at least one
available byte space.
Table 4:
Flow control mechanism
Selected trigger level
(characters)
INT pin activation
Negate RTS or
send Xoff
Assert RTS or
send Xon
11
4
1
44
8
4
8
12
8
14
10
Fig 5.
Autoow control (auto-RTS and auto-CTS) example.
RCV
FIFO
SERIAL TO
PARALLEL
FLOW
CONTROL
XMT
FIFO
PARALLEL
TO SERIAL
FLOW
CONTROL
PARALLEL
TO SERIAL
FLOW
CONTROL
SERIAL TO
PARALLEL
FLOW
XMT
FIFO
RCV
FIFO
ACE1
ACE2
D7 – D0
RX
TX
RTS
CTS
TX
RX
D7 – D0
CONTROL
002aaa048
CTS
RTS
相關PDF資料
PDF描述
SC16C654IB64,128 4 CHANNEL(S), 5M bps, SERIAL COMM CONTROLLER, PQFP64
SC16C654IA68,512 4 CHANNEL(S), 5M bps, SERIAL COMM CONTROLLER, PQCC68
SC18005CQ SPECIALTY MICROPROCESSOR CIRCUIT, PQFP144
SC18IS600IBS,151 I2C BUS CONTROLLER, PQCC24
SC18IS600IBS I2C BUS CONTROLLER, PQCC24
相關代理商/技術參數
參數描述
SC16C550IN40 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Universal Asynchronous Receiver/Transmitter (UART) with 16-byte FIFO and infrared (IrDA) encoder/decoder
SC16C550IN40,112 功能描述:IC UART SINGLE W/FIFO 40-DIP RoHS:是 類別:集成電路 (IC) >> 接口 - UART（通用異步接收器/發送器） 系列:- 標準包裝:250 系列:- 特點:* 通道數:2，DUART FIFO's:16 字節 規程:RS232，RS485 電源電壓:2.25 V ~ 5.5 V 帶并行端口:- 帶自動流量控制功能:是 帶IrDA 編碼器/解碼器:是 帶故障啟動位檢測功能:是 帶調制解調器控制功能:是 帶CMOS:是 安裝類型:表面貼裝 封裝/外殼:48-TQFP 供應商設備封裝:48-TQFP（7x7） 包裝:托盤 其它名稱:XR16L2551IM-F-ND
SC16C554 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Quad UART with 16-byte FIFO and infrared (IrDA) encoder/decoder
SC16C554B 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 16-byte FIFOs
SC16C554B_10 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 16-byte FIFOs
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*