參數資料
型號: SC16C550IB48,128
廠商: NXP SEMICONDUCTORS
元件分類: 微控制器/微處理器
英文描述: 1 CHANNEL(S), 3M bps, SERIAL COMM CONTROLLER, PQFP48
封裝: 7 X 7 MM, 1.40 MM HEIGHT, PLASTIC, MS-026, SOT-313-2, LQFP-48
文件頁數: 2/52頁
文件大?。?/td> 639K
代理商: SC16C550IB48,128
Philips Semiconductors
SC16C550
UART with 16-byte FIFO and IrDA encoder/decoder
Product data
Rev. 05 — 19 June 2003
10 of 52
9397 750 11619
Koninklijke Philips Electronics N.V. 2003. All rights reserved.
6.1 Internal registers
The SC16C550 provides 15 internal registers for monitoring and control. These
registers are shown in Table 3. Twelve registers are similar to those already available
in the standard 16C550. These registers function as data holding registers
(THR/RHR), interrupt status and control registers (IER/ISR), a FIFO control register
(FCR), line status and control registers (LCR/LSR), modem status and control
registers (MCR/MSR), programmable data rate (clock) control registers (DLL/DLM),
and a user accessible scratchpad register (SPR). Beyond the general 16C550
features and capabilities, the SC16C550 offers an enhanced feature register set
(EFR, Xon/Xoff1-2) that provides on-board hardware/software ow control. Register
functions are more fully described in the following paragraphs.
[1]
These registers are accessible only when LCR[7] is a logic 0.
[2]
These registers are accessible only when LCR[7] is a logic 1.
[3]
Enhanced Feature Register, Xon1, 2 and Xoff1, 2 are accessible only when the LCR is set to
“BF(HEX).
6.2 FIFO operation
The 16-byte transmit and receive data FIFOs are enabled by the FIFO Control
Register bit-0 (FCR[0]). With 16C550 devices, the user can set the receive trigger
level, but not the transmit trigger level. The receiver FIFO section includes a time-out
function to ensure data is delivered to the external CPU. An interrupt is generated
whenever the Receive Holding Register (RHR) has not been read following the
loading of a character or the receive trigger level has not been reached.
Table 3:
Internal registers decoding
A2
A1
A0
READ mode
WRITE mode
General register set (THR/RHR, IER/ISR, MCR/MSR, FCR/LSR, SPR)[1]
0
Receive Holding Register
Transmit Holding Register
0
1
Interrupt Enable Register
0
1
0
Interrupt Status Register
FIFO Control Register
0
1
Line Control Register
1
0
Modem Control Register
1
0
1
Line Status Register
n/a
1
0
Modem Status Register
n/a
1
Scratchpad Register
Baud rate register set (DLL/DLM)[2]
0
LSB of Divisor Latch
0
1
MSB of Divisor Latch
Enhanced register set (EFR, Xon/off 1-2)[3]
0
1
0
Enhanced Feature Register
1
0
Xon1 word
1
0
1
Xon2 word
1
0
Xoff1 word
1
Xoff2 word
相關PDF資料
PDF描述
SC16C654IB64,128 4 CHANNEL(S), 5M bps, SERIAL COMM CONTROLLER, PQFP64
SC16C654IA68,512 4 CHANNEL(S), 5M bps, SERIAL COMM CONTROLLER, PQCC68
SC18005CQ SPECIALTY MICROPROCESSOR CIRCUIT, PQFP144
SC18IS600IBS,151 I2C BUS CONTROLLER, PQCC24
SC18IS600IBS I2C BUS CONTROLLER, PQCC24
相關代理商/技術參數
參數描述
SC16C550IN40 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Universal Asynchronous Receiver/Transmitter (UART) with 16-byte FIFO and infrared (IrDA) encoder/decoder
SC16C550IN40,112 功能描述:IC UART SINGLE W/FIFO 40-DIP RoHS:是 類別:集成電路 (IC) >> 接口 - UART(通用異步接收器/發送器) 系列:- 標準包裝:250 系列:- 特點:* 通道數:2,DUART FIFO's:16 字節 規程:RS232,RS485 電源電壓:2.25 V ~ 5.5 V 帶并行端口:- 帶自動流量控制功能:是 帶IrDA 編碼器/解碼器:是 帶故障啟動位檢測功能:是 帶調制解調器控制功能:是 帶CMOS:是 安裝類型:表面貼裝 封裝/外殼:48-TQFP 供應商設備封裝:48-TQFP(7x7) 包裝:托盤 其它名稱:XR16L2551IM-F-ND
SC16C554 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Quad UART with 16-byte FIFO and infrared (IrDA) encoder/decoder
SC16C554B 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 16-byte FIFOs
SC16C554B_10 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 16-byte FIFOs