
56
S29GL-N
S29GL-N_01_A0 May 1, 2006
Da ta
Sh e e t
13. Absolute Maximum Ratings
Notes
1. Minimum DC voltage on input or I/Os is –0.5 V. During voltage transitions, inputs or I/Os may overshoot VSS to –2.0 V for periods of up to
20 ns. See Figure 13.1 on page 56. Maximum DC voltage on input or I/Os is VCC + 0.5 V. During voltage transitions, input or I/O pins may 2. Minimum DC input voltage on pins A9, OE#, and ACC is –0.5 V. During voltage transitions, A9, OE#, and ACC may overshoot VSS to –
2.0 V for periods of up to 20 ns. See
Figure 13.1 on page 56. Maximum DC input voltage on pin A9, OE#, and ACC is +12.5 V which may
overshoot to +14.0V for periods up to 20 ns.
3. No more than one output may be shorted to ground at a time. Duration of the short circuit should not be greater than one second.
4. Stresses above those listed under
Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only;
functional operation of the device at these or any other conditions above those indicated in the operational sections of this data sheet is not
implied. Exposure of the device to absolute maximum rating conditions for extended periods may affect device reliability.
Figure 13.1 Maximum Negative Overshoot Waveform
Figure 13.2 Maximum Positive Overshoot Waveform
14. Operating Ranges
Industrial (I) Devices
Ambient Temperature (TA)
–40°C to +85°C
Supply Voltages
VCC
+2.7 V to +3.6 V or +3.0 V to 3.6 V
VIO (Note 2)
+1.65 V to 1.95 V or VCC
Notes
1. Operating ranges define those limits between which the functionality of the device is guaranteed.
Storage Temperature, Plastic Packages
–65°C to +150°C
Ambient Temperature with Power Applied
–65°C to +125°C
Voltage with Respect to Ground:
–0.5 V to +4.0 V
VIO
–0.5 V to +4.0 V
–0.5 V to +12.5 V
–0.5 V to VCC + 0.5V
200 mA
20 ns
+0.8 V
–0.5 V
20 ns
–2.0 V
20 ns
VCC
+2.0 V
VCC
+0.5 V
20 ns
2.0 V