
2
EPSON
S1C63406/408 TECHNICAL MANUAL
CHAPTER 1: OUTLINE
External interrupt ................................
Input port interrupt:
4 systems
Internal interrupt .................................
Clock timer interrupt:
4 systems
Stopwatch timer interrupt:
2 systems
Programmable timer interrupt: 2 systems
Serial interface interrupt:
3 systems
Power supply voltage ..........................
1.3 V to 3.6 V
(Min. 1.4 V when 700 kHz (Max.) OSC3 CR oscillator is used)
(Min. 1.6 V when 2.2 MHz (Max.) OSC3 CR oscillator is used)
(Min. 1.8 V when 4.2 MHz (Max.) OSC3 oscillator is used)
Operating temperature range .............
-40°C to 85°C
Current consumption ..........................
Low-power operation (
3):
During SLEEP
1.2 A (Typ.)
During HALT (32 kHz cryctal oscillation)
3.6 V (LCD OFF)
1.3 A (Typ.)
3.6 V (LCD ON, VC1 standard)
3.0 A (Typ.)
3.6 V (LCD ON, VC2 standard)
2.5 A (Typ.)
During operation (32 kHz cryctal oscillation)
3.6 V (LCD OFF)
3.0 A (Typ.)
During HALT (60 kHz CR oscillation)
3.6 V (LCD OFF)
3.5 A (Typ.)
3.6 V (LCD ON, VC1 standard)
6.2 A (Typ.)
3.6 V (LCD ON, VC2 standard)
4.6 A (Typ.)
During operation (60 kHz CR oscillation)
3.6 V (LCD OFF)
7.0 A (Typ.)
High-speed operation:
During operation (500 kHz CR oscillation)
3.6 V (LCD OFF)
90 A (Typ.)
During operation (1 MHz CR oscillation)
3.6 V (LCD OFF)
200 A (Typ.)
During operation (2 MHz CR oscillation)
3.6 V (LCD OFF)
350 A (Typ.)
During operation (3.58 MHz ceramic oscillation)
3.6 V (LCD OFF)
500 A (Typ.)
During operation (4 MHz crystal oscillation)
3.6 V (LCD OFF)
550 A (Typ.)
Package ..............................................
TQFP15-128pin (plastic) or chip (S1C63406)
QFP15-128pin (plastic) or chip
(S1C63408)
1: Can be selected with mask option
2: Can be selected with software
3: Current consumption when the reset circuit option is not selected (Reset
circuit current will be added when the reset circuit option is selected.)