參數資料
型號: S1C60N01F
元件分類: 微控制器/微處理器
英文描述: 4-BIT, MROM, 0.08 MHz, MICROCONTROLLER, PQFP48
封裝: PLASTIC, QFP12-48
文件頁數: 93/153頁
文件大?。?/td> 901K
代理商: S1C60N01F
I-32
EPSON
S1C60N01 TECHNICAL HARDWARE
CHAPTER 4: PERIPHERAL CIRCUITS AND OPERATION (I/O Ports)
Input or output mode can be set for the four bits of I/O port
P00–P03 by writing data into I/O control register IOC.
To set the input mode, 0 is written to the I/O control regis-
ter. When an I/O port is set to input mode, its impedance
becomes high and it works as an input port. However, the
input line is pulled down when input data is read.
The output mode is set when 1 is written to the I/O control
register (IOC). When an I/O port set to output mode works
as an output port, it outputs a high signal (VDD) when the
port output data is 1, and a low signal (VSS) when the port
output data is 0.
After an initial reset, the I/O control register is set to 0, and
the I/O port enters the input mode.
The output specification during output mode (IOC = 1) of the
I/O port can be set with the mask option for either comple-
mentary output or Pch open drain output. This setting can
be performed for each bit of the I/O port. However, when
Pch open drain output has been selected, voltage in excess
of the supply voltage must not be applied to the port.
Mask option
I/O control register
and I/O mode
相關PDF資料
PDF描述
S1C60N02D 4-BIT, MROM, 0.08 MHz, MICROCONTROLLER, UUC52
S1C60L02 4-BIT, MROM, 0.08 MHz, MICROCONTROLLER, PQFP60
S1C60N04D 4-BIT, MROM, 2 MHz, MICROCONTROLLER, UUC48
S1C60N08D 4-BIT, MROM, 0.032768 MHz, MICROCONTROLLER, UUC96
S1C60N08F0A0100 MICROCONTROLLER, PQFP100
相關代理商/技術參數
參數描述
S1C60N05 制造商:EPSON 制造商全稱:EPSON 功能描述:4-bit Single Chip Microcomputer
S1C60N08 制造商:EPSON 制造商全稱:EPSON 功能描述:4-bit Single Chip Microcomputer
S1C60N16 制造商:EPSON 制造商全稱:EPSON 功能描述:4-bit Single Chip Microcomputer
S1C60R08 制造商:EPSON 制造商全稱:EPSON 功能描述:4-bit Single Chip Microcomputer
S1C63004 制造商:EPSON 制造商全稱:EPSON 功能描述:CMOS 4-bit Single Chip Microcontroller