
PRELIMINARY                                                RV5C386A
12345
- 3 -
5. PIN DESCRIPTION
Symbol
 SCL
Item
Description
Serial
Clock Line
The SCL pin is used to input clock pulses synchronizing the input and output
of data to and from the SDA pin.  Allows a maximum input voltage of 5.5
volts regardless of supply voltage.
The SDA pin is used to input or output data intended for writing or reading in
synchronization with the SCL pin. Up to 5.5v beyond VDD may be input.
This pin functions as an Nch open drain output.
The /INTRA pin is used to output periodic interrupt signals to the CPU and
alarm interrupt (Alarm_D) signals.  Disabled at power-on from 0 volts.  Nch.
open drain output.
The /INTRB pin is used to output alarm interrupt (Alarrm_W) signals to the
CPU.  Disabled at power-on from 0 volts.  Nch. open drain output.
The 32KOUT pin is used to output 32.768-kHz clock pulses.  Enabled at
power-on from 0 volts. CMOS output.  The output is disabled if the CLKC pin
is set to Low or open.
The CLKC pin is used to control output of the 32KOUT pin.  The clock output
is disabled and held low when the pin is set to low or open.  Incorporates a
pull-down resistor.
The OSCIN and OSCOUT pins are used to connect the 32.768-kHz crystal
oscillator (with all other oscillation circuit components built into the
RV5C386A).
The VDD pin is connected to the power supply.
 SDA
Serial
Data Line
 /INTRA
Interrupt
Output A
 /INTRB
Interrupt
Output B
32kHz Clock
Output
 32KOUT
 CLKC
Clock control
input
 OSCIN
 OSCOUT
Oscillation
Circuit
Input / Output
Positive Power
Supply Input
Negative Power
Supply Input
 VDD
 VSS
The VSS pin is grounded.
6. ABSOLUTE MAXIMUM RATINGS
(VSS=0V)
Unit
V
V
V
V
mW
°
C
°
C
Symbol
 VDD
 VI
 VO
Item
Pin Name
Description
 Supply Voltage
 Input Voltage
 Output Voltage 1
 Output Voltage 1
 Power Dissipation
 Operating Temperature
 Storage Temperature
  -0.3 to +6.5
  -0.3 to +6.5
  -0.3 to +6.5
  -0.3 to VDD+0.3
  300
  -40 to +85
  -55 to +125
   SCL, SDA, CLKC
 SDA, /INTRA, /INTRB
 32KOUT
   Topt = 25
°
C
 PD
 Topt
 Tstg
7. RECOMMENDED OPERATING CONDITIONS
(VSS=0V, Topt=-40 to +85
°
C)
Min,
Typ.
2.0
1.45
32.768
Symbol
 VDD
 VCLK
 fXT
 VPUP
Item
Pin Name
Max.
5.5
5.5
Unit
V
V
kHz
V
 Supply Voltage
 Timekeeping Voltage
 Oscillation Frequency
 Pull-up Voltage
 SCL, SDA, /INTRA,
 /INTRB
5.5