
PRELIMINAR
Y
6
PID9q-604e Hardware Specifications
PRELIMINARYSUBJECT TO CHANGE WITHOUT NOTICE
1.4 Electrical and Thermal Characteristics
This section provides both the AC and DC electrical specications and thermal characteristics for the 604e.
1.4.1 DC Electrical Characteristics
The tables in this section describe the 604e DC electrical characteristics. Table 1 provides the absolute
maximum ratings.
Table 2 provides the recommended operating conditions for the 604e.
Table 1. Absolute Maximum Ratings
Characteristic
Symbol
Value
Unit
Core supply voltage
Vdd
0.3 to 2.80
V
PLL supply voltage
AVdd
0.3 to 2.80
V
I/O supply voltage
OVdd
0.3 to 3.8
V
Input voltage
Vin
0.3 to 3.3
V
Overshoot (with respect to system GND)
Vovs
4.0
V
Undershoot (with respect to system GND)
Vuns
-0.45
V
Storage temperature range
Tstg
55 to 150
C
Notes:
1. Functional and tested operating conditions are given in Table 2. Absolute maximum ratings are stress
ratings only, and functional operation at the maximums is not guaranteed. Stresses beyond those listed
may affect device reliability or cause permanent damage to the device.
2. Caution: Power up/down sequence must be adhered to to avoid device damage.
The power-up sequence is GND, Vdd, OVdd
The power-down sequence is OVdd, Vdd, GND
In either case the rule OVdd Vdd
2.0V must be followed.
3. Caution: During system power-up, any 604e signal VDDcore must not exceed 2.0V
4. Caution: 604e inputs are not 5V tolerant.
Table 2. Recommended Operating Conditions
Characteristic
Symbol
Value
Unit
Core supply voltage
Vdd
1.8 to 2.0
V
PLL supply voltage
AVdd
1.8 to 2.0
V
I/O supply voltage
OVdd
3.135 to 3.465
V
Input voltage
Vin
GND to 3.3
V
Junction temperature
Tj
0 to 105
C
Note: These are the recommended and tested operating conditions. Proper device operation outside of these
conditions is not guaranteed.