參數資料
型號： MC-424LFG641
廠商： NEC Corp.
英文描述： 64 bits dynamic RAM modules(64 位動態RAM 模塊)
中文描述： 64位動態RAM模塊（64位動態內存模塊）
文件頁數： 43/44頁
文件大?。?/td> 368K
代理商： MC-424LFG641
43
MC-424LFG641
1
PRECAUTION AGAINST ESD FOR SEMICONDUCTORS
Note: Strong electric field, when exposed to a MOS device, can cause destruction
of the gate oxide and ultimately degrade the device operation. Steps must
be taken to stop generation of static electricity as much as possible, and
quickly dissipate it once, when it has occurred. Environmental control must
be adequate. When it is dry, humidifier should be used. It is recommended
to avoid using insulators that easily build static electricity. Semiconductor
devices must be stored and transported in an anti-static container, static
shielding bag or conductive material. All test and measurement tools
including work bench and floor should be grounded. The operator should
be grounded using wrist strap. Semiconductor devices must not be touched
with bare hands. Similar precautions need to be taken for PW boards with
semiconductor devices on it.
2
HANDLING OF UNUSED INPUT PINS FOR CMOS
Note: No connection for CMOS device inputs can be cause of malfunction. If no
connection is provided to the input pins, it is possible that an internal input
level may be generated due to noise, etc., hence causing malfunction. CMOS
device behave differently than Bipolar or NMOS devices. Input levels of
CMOS devices must be fixed high or low by using a pull-up or pull-down
circuitry. Each unused pin should be connected to V
DD
or GND with a
resistor, if it is considered to have a possibility of being an output pin. All
handling related to the unused pins must be judged device by device and
related specifications governing the devices.
3
STATUS BEFORE INITIALIZATION OF MOS DEVICES
Note: Power-on does not necessarily define initial status of MOS device. Produc-
tion process of MOS does not define the initial operation status of the
device. Immediately after the power source is turned ON, the devices with
reset function have not yet been initialized. Hence, power-on does not
guarantee out-pin levels, I/O settings or contents of registers. Device is not
initialized until the reset signal is received. Reset operation must be
executed imme-diately after power-on for devices having reset function.
NOTES FOR CMOS DEVICES
相關PDF資料
PDF描述
MC-428LFC72 3.3 V Operation 4M-Word By 64-Bit Dynamic RAM Module(工作電壓為3.3V的動態RAM模塊)
MC-428LFF721 3.3 V Operation 16M-Word By 72-Bit Dynamic RAM Module(工作電壓為3.3V的動態RAM模塊)
MC-428LFG641 3.3 V Operation 8M-Word By 72-Bit Dynamic RAM Module(工作電壓為3.3V的DRAM模塊)
MC-428LFH641 3.3 V Operation 8M-Word By 72-Bit Dynamic RAM Module(工作電壓為3.3V的DRAM模塊)
MC-42S4LFG64S 3.3 V Operation 16M-Word By 65-Bit Dynamic RAM Module(工作電壓為3.3V的動態RAM模塊)
相關代理商/技術參數
參數描述
MC424P 制造商:Rochester Electronics LLC 功能描述:- Bulk
MC425D 制造商:Thomas & Betts 功能描述:MC425D MALE INSERT,CRIMP 制造商:Thomas & Betts 功能描述:MALE INSERT,CRIMP
MC428P 制造商:Rochester Electronics LLC 功能描述:- Bulk
MC42B505J 制造商:ELE 功能描述:AF550X050 ELECT'CUBE MOLDED
MC42S8LFF64SAA60 制造商:NEC Electronics Corporation 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*