參數資料
型號: M66291GP
元件分類: 總線控制器
英文描述: UNIVERSAL SERIAL BUS CONTROLLER, PQFP48
封裝: 7 X 7 MM, 0.50 MM PITCH, PLASTIC, LQFP-48
文件頁數: 44/128頁
文件大?。?/td> 928K
代理商: M66291GP
M66291GP/HP
Rev 1.01 2004.11.01 page 20 of 122
(6) BE01 (Buffer Empty/Size Over Error Interrupt Assign) Bit (b10)
This bit selects the pin to output the buffer empty/size over error interrupt signal.
(7) NR01 (Buffer Not Ready Interrupt Assign) Bit (b9)
This bit selects the pin to output the buffer not ready interrupt signal.
(8) RD01 (Buffer Ready Interrupt Assign) Bit (b8)
This bit selects the pin to output the buffer ready interrupt signal.
(9) RDYM (Buffer Ready Mode) Bit (b2)
This bit selects the method of clearing the buffer ready interrupt.
When this bit is set to “0”, the EPB_RDY bit is cleared to “0” after the CPU side buffer data are all read out or
after the writing of transmit data completes.
When this bit is set to “1”, the EPB_RDY bit is cleared to “0” by writing “0” to the EPB_RDY bit.
For details, refer to “EPB_RDY bit”.
Note :
Refer to “3.2 FIFO Buffer” for CPU/SIE side.
(10) INTL (Interrupt Output Sense) Bit (b1)
This bit sets the sense mode for interrupt output from INT0 or INT1 pin.
When this bit is set to “0”, the INT0 or INT1 pin notifies the occurrence of interrupt at the edge set by the
INTA bit.
During edge sensitive output, when “0” is written to each interrupt factor bit to clear the interrupt, the output
signal outputs the negate value one time. If the other interrupt factor bits are set to “1”, the occurrence of
interrupt again is notified at the edge. The negate period is equivalent to 32 clocks (approx. 667 ns) of the 48
MHz clock.
In case the clock is not supplied (Note), the negate period does not occur. Make sure not to miss the interrupt
when Vbus interrupt or resume interrupt occurs.
When this bit is set to “1”, the INT0 or INT1 pin notifies the occurrence of interrupt at the level set by the
INTA bit.
During level sensitive output, the negate fails to work unless all interrupt factor bits are cleared even if “0” is
written to clear the interrupt to the interrupt factor bits.
Refer to Figure 2.5 and “3.1 Interrupt Function”.
Note : SCKE bit = “0” when XCKE bit = “1 ” , or XCKE bit = “0”.
相關PDF資料
PDF描述
M68HC08AZ0 8-BIT, EEPROM, 8 MHz, MICROCONTROLLER, PQFP100
M69030 GRAPHICS PROCESSOR, PBGA278
MA4T85633 C BAND, Si, NPN, RF SMALL SIGNAL TRANSISTOR
MA4T85600 Si, RF POWER TRANSISTOR
MA4T85635 C BAND, Si, NPN, RF SMALL SIGNAL TRANSISTOR
相關代理商/技術參數
參數描述
M66291GP#201 制造商:Renesas Electronics Corporation 功能描述:IC ASSP USB2.0 DEVICE CONTROLLER 48LQFP
M66291GP#RB0S 功能描述:IC USB CONTROLLER GEN-PUR 48LQFP RoHS:是 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN(6x6) 包裝:* 其它名稱:Q6396337A
M66291GPRB0S 制造商:Renesas Electronics Corporation 功能描述:USB2.0 Device Controller,LQFP48
M66291HP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:ASSP (USB2.0 Device Controller)
M66291HP#200D 功能描述:IC USB CONTROLLER GEN-PUR 52VQFN RoHS:否 類別:集成電路 (IC) >> 接口 - 控制器 系列:- 標準包裝:4,900 系列:- 控制器類型:USB 2.0 控制器 接口:串行 電源電壓:3 V ~ 3.6 V 電流 - 電源:135mA 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:36-VFQFN 裸露焊盤 供應商設備封裝:36-QFN(6x6) 包裝:* 其它名稱:Q6396337A