參數資料
型號: GS1561-CFE3
廠商: Gennum Corporation
英文描述: GS1560A/GS1561 HD-LINX-R II Dual-Rate Deserializer
中文描述: GS1560A/GS1561的HD - LINX進程- R的第二雙率解串器
文件頁數: 70/80頁
文件大?。?/td> 842K
代理商: GS1561-CFE3
GS1560A/GS1561 Data Sheet
27360 - 8
September 2005
70 of 80
3.12.3 Configuration and Status Registers
Table 3-17
summarizes the GS1560A/GS1561's internal status and configuration
registers.
All of these registers are available to the host via the GSPI and are all individually
addressable.
Where status registers contain less than the full 16 bits of information however, two
or more registers may be combined at a single logical address.
3.13 JTAG
When the JTAG/HOST input pin of the GS1560A/GS1561 is set HIGH, the host
interface port will be configured for JTAG test operation. In this mode, pins 27
through 30 become TMS, TDO, TDI, and TCK. In addition, the RESET_TRST pin
will operate as the test reset pin.
Boundary scan testing using the JTAG interface will be enabled in this mode.
There are two methods in which JTAG can be used on the GS1560A/GS1561:
1. As a stand-alone JTAG interface to be used at in-circuit ATE (Automatic Test
Equipment) during PCB assembly; or
2. Under control of the host for applications such as system power on self tests.
When the JTAG tests are applied by ATE, care must be taken to disable any other
devices driving the digital I/O pins. If the tests are to be applied only at ATE, this
can be accomplished with tri-state buffers used in conjunction with the
JTAG/HOST input signal. This is shown in
Figure 3-14
.
Table 3-17: GS1560A internal registers
Address
Register Name
See Section
000h
IOPROC_DISABLE
Section 3.10.6
001h
ERROR_STATUS
Section 3.10.5
003h
EDH_FLAG
Section 3.10.7
004h
VIDEO_STANDARD
Section 3.10.4
005h - 009h
ANC_TYPE
Section 3.10.2.1
00Ch - 00Dh
VIDEO_FORMAT
Section 3.10.3
00Eh - 011h
RASTER_STRUCTURE
Section 3.10.4
012h - 019h
EDH_CALC_RANGES
Section 3.10.5.2
01Ah
ERROR_MASK
Section 3.10.5
相關PDF資料
PDF描述
GS1574A GS1574A HD-LINX-R II Adaptive Cable Equalizer
GS1574ACNE3 GS1574A HD-LINX-R II Adaptive Cable Equalizer
GS1574 GS1574 HD-LINX -TM II Adaptive Cable Equalizer
GS1574-CNE3 GS1574 HD-LINX -TM II Adaptive Cable Equalizer
GS1575A GS1575A / GS9075A HD-LINX-R II Multi-Rate SDI Automatic Reclocker
相關代理商/技術參數
參數描述
GS1561-CFT 制造商:Rochester Electronics LLC 功能描述: 制造商:Gennum Corporation 功能描述:
GS1561-CFTE3 制造商:Semtech Corporation 功能描述:Receiver for HD/SD/ASI w/out loop thru
GS1563 制造商:Thomas & Betts 功能描述:Installing Dies
GS1567 制造商:P&B 功能描述:5945-00-9151610
GS1572-IBE3 功能描述:RF, RFID, WIRELESS RoHS:是 類別:集成電路 (IC) >> 接口 - 串行器,解串行器 系列:* 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 功能:解串器 數據速率:2.5Gbps 輸入類型:串行 輸出類型:并聯 輸入數:- 輸出數:24 電源電壓:1.8 V ~ 3.3 V 工作溫度:-40°C ~ 105°C 安裝類型:表面貼裝 封裝/外殼:64-TQFP 裸露焊盤 供應商設備封裝:64-TQFP-EP(10x10) 包裝:管件