參數資料
型號： 90E36ERGI
廠商： INTEGRATED DEVICE TECHNOLOGY INC
元件分類： 模擬信號調理
英文描述： SPECIALTY ANALOG CIRCUIT, PQFP48
封裝： TQFP-48
文件頁數： 4/75頁
文件大小： 904K
代理商： 90E36ERGI
90E36
POLY-PHASE HIGH-PERFORMANCE WIDE-SPAN ENERGY METERING IC
Function Description
12
August 24, 2011
3
FUNCTION DESCRIPTION
3.1
POWER SUPPLY
The 90E36 works with single power rail 3.3V. An on-chip voltage reg-
ulator regulates the 1.8V voltage for the digital logic.
The regulated 1.8V power is connected to the VDD18 pin. It needs to
be bypassed by an external capacitor.
The 90E36 has multiple power modes, in Idle and Detection modes
the 1.8V power regulator is not turned on and the digital logic is not pow-
ered. When the logic is not powered, all the configured register values
are not kept (all context lost) except for Detection mode related registers
(10H~13H) for Detection mode configuration.
User has to re-configure the registers in Partial Measurement mode
or Normal mode when transiting from Idle or Detection mode. Refer to
3.7 Power Mode for power mode details.
3.2
CLOCK
The 90E36 has an on-chip oscillator and can directly connect to an
external crystal.
The OSCI pin can also be driven with a clock source.
The oscillator will be powered down in Idle and Detection power
modes, as described in 3.7 Power Mode.
3.3
RESET
There are three reset sources for the 90E36:
-
RESET pin
-
On-chip Power On Reset circuit
-
Software Reset generated by the Software Reset register
3.3.1
RESET PIN
The RESET pin can be asserted to reset the 90E36. The RESET pin
has RC filter with typical time constant of 2
s in the I/O, as well as a 2s
(typical) de-glitch filter.
Any reset pulse that is shorter than 2
s can not reset the 90E36.
3.3.2
POWER ON RESET (POR)
The POR circuit resets the 90E36 at power up.
POR circuit triggers reset when:
-
DVDD power up, crossing the power-up threshold. Refer to Fig-
-
VDD18 regulator changing from disable to enable, i.e. from Idle or
Detection mode to Partial Measurement mode or Normal mode.
Refer to Figure-25.
3.3.3
SOFTWARE RESET
Chip reset can be triggered by writing to the SoftReset register in
Normal mode. The software reset is the same as the reset scope gener-
ated from the RESET pin or POR.
These three reset sources have the same reset scope.
All digital logics and registers, except for the Harmonic Ratio regis-
ters will be subject to reset. The Harmonic Ratio registers can not be
reset.
Interface logic: clock dividers
Digital core/ logic: All registers except for the Harmonic Ratio
registers and some other special registers, refer to 6.3.1 Detec-
相關PDF資料
PDF描述
90MMCX-S50-0-51/111 MMCX CONNECTOR, JACK
91-21SUBC/S400-A6/TR10 T-3/4 SINGLE COLOR LED, BLUE, 1.9 mm
91-21SURC/S530-A3/TR7 T-3/4 SINGLE COLOR LED, BRILLIANT RED, 1.9 mm
91-21SURC/S530-A3/TR9 T-3/4 SINGLE COLOR LED, BRILLIANT RED, 1.9 mm
91-21USRC/S530-A4/F7 T-3/4 SINGLE COLOR LED, DARK RED, 1.9 mm
相關代理商/技術參數
參數描述
90E36ERGI8 功能描述:電流和電力監控器、調節器 RoHS:否 制造商:STMicroelectronics 產品:Current Regulators 電源電壓-最大:48 V 電源電壓-最小:5.5 V 工作溫度范圍:- 40 C to + 150 C 安裝風格:SMD/SMT 封裝 / 箱體:HPSO-8 封裝:Reel
90E3-SERIES 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Optoelectronic
90E46EMGI 功能描述:計量片上系統 - SoC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 處理器系列:71M6511 類型:Metering SoC 最大時鐘頻率:70 Hz 程序存儲器大小:64 KB 數據 RAM 大小:7 KB 接口類型:UART 可編程輸入/輸出端數量:12 片上 ADC: 安裝風格:SMD/SMT 封裝 / 箱體:LQFP-64 封裝:Reel
90E46EMGI8 制造商:Integrated Device Technology Inc 功能描述:Energy Metering SoC 100-Pin TQFP 制造商:Integrated Device Technology Inc 功能描述:100-PIN TQFP - Tape and Reel
90E9A 制造商:NDK 制造商全稱:NDK 功能描述:crystal filter that supports surface mounting.
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*