參數資料
型號： μPD26401
廠商： NEC Corp.
英文描述： 1M-Bit SRAM and 2M-Bit MASK ROM COMBO Chip(1M位SRAM 和2M位MASK ROM)
中文描述： 100萬位的SRAM和2M位掩膜ROM集成芯片（100萬位的SRAM和200萬位掩膜ROM）
文件頁數： 19/20頁
文件大小： 119K
代理商： ΜPD26401
19
μ
PD26401
1
PRECAUTION AGAINST ESD FOR SEMICONDUCTORS
Note: Strong electric field, when exposed to a MOS device, can cause destruction
of the gate oxide and ultimately degrade the device operation. Steps must
be taken to stop generation of static electricity as much as possible, and
quickly dissipate it once, when it has occurred. Environmental control must
be adequate. When it is dry, humidifier should be used. It is recommended
to avoid using insulators that easily build static electricity. Semiconductor
devices must be stored and transported in an anti-static container, static
shielding bag or conductive material. All test and measurement tools
including work bench and floor should be grounded. The operator should
be grounded using wrist strap. Semiconductor devices must not be touched
with bare hands. Similar precautions need to be taken for PW boards with
semiconductor devices on it.
2
HANDLING OF UNUSED INPUT PINS FOR CMOS
Note: No connection for CMOS device inputs can be cause of malfunction. If no
connection is provided to the input pins, it is possible that an internal input
level may be generated due to noise, etc., hence causing malfunction. CMOS
device behave differently than Bipolar or NMOS devices. Input levels of
CMOS devices must be fixed high or low by using a pull-up or pull-down
circuitry. Each unused pin should be connected to V
DD
or GND with a
resistor, if it is considered to have a possibility of being an output pin. All
handling related to the unused pins must be judged device by device and
related specifications governing the devices.
3
STATUS BEFORE INITIALIZATION OF MOS DEVICES
Note: Power-on does not necessarily define initial status of MOS device. Produc-
tion process of MOS does not define the initial operation status of the
device. Immediately after the power source is turned ON, the devices with
reset function have not yet been initialized. Hence, power-on does not
guarantee out-pin levels, I/O settings or contents of registers. Device is not
initialized until the reset signal is received. Reset operation must be
executed imme-diately after power-on for devices having reset function.
NOTES FOR CMOS DEVICES
相關PDF資料
PDF描述
μPD26411 1M-Bit SRAM and 2M-Bit MASK ROM COMBO Chip(1M位靜態RAM 和2M位掩膜 ROM)
μPD30111 64-Bit MIPS RISC Microprocessor(64 位RISC 微處理器)
μPD421165 1M- bit CMOS dynamic RAMs(1M CMOS 動態RAM)
μPD4216165L 16M- bit CMOS dynamic RAMs(16M CMOS 動態RAM)
μPD42S16165L 16M- bit CMOS dynamic RAMs(16M CMOS 動態RAM)
相關代理商/技術參數
參數描述
PD264-6C 制造商:EVERLIGHT 制造商全稱:Everlight Electronics Co., Ltd 功能描述:3mm Silicon PIN Photodiode,T-1
PD264-6L3 制造商:EVERLIGHT 制造商全稱:Everlight Electronics Co., Ltd 功能描述:3mm Silicon PIN Photodiode,T-1
PD26C2 制造商:RFHIC 制造商全稱:RFHIC 功能描述:2Way Power Divider
PD26T2 制造商:RFHIC 制造商全稱:RFHIC 功能描述:2Way Power Divider
PD27 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog IC
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*