
XRT83L38
6
REV. 1.0.2
OCTAL T1/E1/J1 LH/SH TRANSCEIVER WITH CLOCK RECOVERY AND JITTER ATTENUATOR
RPOS_0
RDATA_0
RPOS_1
RDATA_1
RPOS_2
RDATA_2
RPOS_3
RDATA_3
RPOS_4
RDATA_4
RPOS_5
RDATA_5
RPOS_6
RDATA_6
RPOS_7
RDATA_7
B2
G2
D15
B17
U2
M3
L17
T17
O
Receiver Positive Data Output for Channel _0 - Dual-Rail mode
This signal is the receive positive-rail output data sent to the Framer.
Receiver NRZ Data Output for Channel _0 - Single-Rail mode
This signal is the receive output data.
Receiver Positive Data Output for Channel _1
Receiver NRZ Data Output for Channel _1
Receiver Positive Data Output for Channel _2
Receiver NRZ Data Output for Channel _2
Receiver Positive Data Output for Channel _3
Receiver NRZ Data Output for Channel _3
Receiver Positive Data Output for Channel _4
Receiver NRZ Data Output for Channel _4
Receiver Positive Data Output for Channel _5
Receiver NRZ Data Output for Channel _5
Receiver Positive Data Output for Channel _6
Receiver NRZ Data Output for Channel 6
Receiver Positive Data Output for Channel _7
Receiver NRZ Data Output for Channel _7
RTIP_0
RTIP_1
RTIP_2
RTIP_3
RTIP_4
RTIP_5
RTIP_6
RTIP_7
C1
G1
G18
C18
U1
L1
L18
T18
I
Receiver Differential Tip Input for Channel _0
Positive differential receive input from the line
Receiver Differential Tip Input for Channel _1
Receiver Differential Tip Input for Channel _2
Receiver Differential Tip Input for Channel _3
Receiver Differential Tip Input for Channel _4
Receiver Differential Tip Input for Channel _5
Receiver Differential Tip Input for Channel _6
Receiver Differential Tip Input for Channel _7
RRING_0
RRING_1
RRING_2
RRING_3
RRING_4
RRING_5
RRING_6
RRING_7
D1
F1
F18
D18
T1
M1
M18
R18
I
Receiver Differential Ring Input for Channel _0
Negative differential receive input from the line
Receiver Differential Ring Input for Channel _1
Receiver Differential Ring Input for Channel _2
Receiver Differential Ring Input for Channel _3
Receiver Differential Ring Input for Channel _4
Receiver Differential Ring Input for Channel _5
Receiver Differential Ring Input for Channel _6
Receiver Differential Ring Input for Channel _7
RXMUTE
T12
I
Receive Data Muting
When a LOS condition occurs, the outputs RPOS_n/RNEG_n will be muted, (forced to
ground) to prevent data chattering.
Tie this pin “Low” to disable the muting function.
NOTES:
1.
This pin is internally pulled “High” with a 50k
Ω resistor.
2.
In Hardware mode, all receive channels share the same RXMUTE control
function.
SIGNAL NAME
LEAD #TYPE
DESCRIPTION