參數資料
型號: XC161CJ
廠商: INFINEON TECHNOLOGIES AG
英文描述: 16-Bit Single-Chip Microcontroller
中文描述: 16位單片機
文件頁數: 39/79頁
文件大?。?/td> 2440K
代理商: XC161CJ
XC161
Derivatives
Functional Description
Data Sheet
35
V2.2, 2003-06
3.9
A/D Converter
For analog signal measurement, a 10-bit A/D converter with 12 multiplexed input
channels and a sample and hold circuit has been integrated on-chip. It uses the method
of successive approximation. The sample time (for loading the capacitors) and the
conversion time is programmable (in two modes) and can thus be adjusted to the
external circuitry. The A/D converter can also operate in 8-bit conversion mode, where
the conversion time is further reduced.
Overrun error detection/protection is provided for the conversion result register
(ADDAT): either an interrupt request will be generated when the result of a previous
conversion has not been read from the result register at the time the next conversion is
complete, or the next conversion is suspended in such a case until the previous result
has been read.
For applications which require less analog input channels, the remaining channel inputs
can be used as digital input port pins.
The A/D converter of the XC161 supports four different conversion modes. In the
standard Single Channel conversion mode, the analog level on a specified channel is
sampled once and converted to a digital result. In the Single Channel Continuous mode,
the analog level on a specified channel is repeatedly sampled and converted without
software intervention. In the Auto Scan mode, the analog levels on a prespecified
number of channels are sequentially sampled and converted. In the Auto Scan
Continuous mode, the prespecified channels are repeatedly sampled and converted. In
addition, the conversion of a specific channel can be inserted (injected) into a running
sequence without disturbing this sequence. This is called Channel Injection Mode.
The Peripheral Event Controller (PEC) may be used to automatically store the
conversion results into a table in memory for later evaluation, without requiring the
overhead of entering and exiting interrupt routines for each data transfer.
After each reset and also during normal operation the ADC automatically performs
calibration cycles. This automatic self-calibration constantly adjusts the converter to
changing operating conditions (e.g. temperature) and compensates process variations.
These calibration cycles are part of the conversion cycle, so they do not affect the normal
operation of the A/D converter.
In order to decouple analog inputs from digital noise and to avoid input trigger noise
those pins used for analog input can be disconnected from the digital IO or input stages
under software control. This can be selected for each pin separately via register P5DIDIS
(Port 5 Digital Input Disable).
The Auto-Power-Down feature of the A/D converter minimizes the power consumption
when no conversion is in progress.
相關PDF資料
PDF描述
XC161CS-32F 16-Bit Single-Chip Microcontroller with C166SV2 Core
XC164-32F 16-Bit Single-Chip Microcontroller with C166SV2 Core
XC164CM 16-bit Microcontroller
XC164CS 16-Bit Single-Chip Microcontroller
XC164CS-16F 16-Bit Single-Chip Microcontroller with C166SV2 Core
相關代理商/技術參數
參數描述
XC161CJ_02 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:16-Bi t Single-Chip Microcontroller Preliminary
XC161CJ-16F 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:16-Bit Single-Chip Microcontroller with C166SV2 Core
XC161CJ-16F_06 制造商:INFINEON 制造商全稱:Infineon Technologies AG 功能描述:16-Bit Single-Chip Microcontroller with C166SV2 Core
XC161CJ16F40FBBFXQMA1 制造商:Infineon Technologies AG 功能描述:16 BIT FLASH - Trays
XC161CJ16F40FBBFXUMA1 制造商:Infineon Technologies AG 功能描述:MCU 16-BIT XC166 CISC/DSP/RISC 128KB FLASH 2.5V/5V 144-PIN TQFP 制造商:Infineon Technologies AG 功能描述:16 BIT FLASH - Tape and Reel 制造商:Infineon Technologies AG 功能描述:IC MCU 16BIT 128KB FLSH 144TQFP