
6
User’s Manual U13952EJ3V1UD
Major Revisions in This Edition
Page
Description
U13952EJ2V0UD00
→ U13952EJ3V0UD00
pp.38, 39, 41
Modification of pin handling of AVREF pin and VPP pin in CHAPTER 2 PIN FUNCTIONS
p.92
Addition of Note related to feedback resistor in Figure 5-3 Format of Suboscillation Mode Register
pp.112, 113
Addition of 6.5 Cautions on Using 16-Bit Timer 50
pp.151, 164
Addition of (8) Input impedance of ANI0 to ANI6 pins in 10.5 Cautions on Using 8-Bit A/D Converter and
11.5 Cautions on Using 10-Bit A/D Converter
p.154
Modification of description of (2) A/D conversion result register 0 (ADCR0) in 11.2 Configuration of 10-Bit
A/D Converter
p.196
Addition of description on reading receive data of UART in 13.4.2 Asynchronous serial interface (UART)
mode
p.232
Addition of Caution in Figure 15-2 Format of Interrupt Request Flag Register
p.237
Addition of Caution in Figure 15-7 Format of Key Return Mode Register 00
p.256
Addition of description on pull-up resistor and divider resistor for LCD driving in Table 18-1 Differences
Between
PD78F9418A and Mask ROM Versions
pp.257 to 266
Overall revision of contents related to flash memory programming as 18.1 Flash Memory Characteristics
pp.278 to 292
Addition of CHAPTER 21 ELECTRICAL SPECIFICATIONS
pp.293 to 295
Addition of CHAPTER 22 CHARACTERISTICS CURVES (REFERENCE VALUES)
pp.296, 297
Addition of CHAPTER 23 PACKAGE DRAWINGS
pp.298, 299
Addition of CHAPTER 24 RECOMMENDED SOLDERING CONDITIONS
pp.301 to 310
Overall revision of contents of APPENDIX A DEVELOPMENT TOOLS
Deletion of embedded software
pp.311 to 314
Addition of APPENDIX B NOTES ON TARGET SYSTEM DESIGN
U13952EJ3V0UD00
→ U13952EJ3V1UD00
p. 24
Modification of 1.3 Ordering Information
p. 300
Addition of Table 24-1. Surface Mounting Type Soldering Conditions (3/3)
The mark
shows major revised points.