參數資料
型號： TOOLSTICK300DC
廠商： Silicon Laboratories Inc
文件頁數： 25/178頁
文件大小： 0K
描述： TOOLSTICK DAUGHTER CARD
標準包裝： 1
系列： ToolStick
類型： MCU
適用于相關產品： C8051F300
所含物品： 子卡
C8051F300/1/2/3/4/5
120
Rev. 2.9
SFR Definition 13.2.
Bit7:
MASTER: SMBus Master/Slave Indicator.
This read-only bit indicates when the SMBus is operating as a master.
0: SMBus operating in Slave Mode.
1: SMBus operating in Master Mode.
Bit6:
TXMODE: SMBus Transmit Mode Indicator.
This read-only bit indicates when the SMBus is operating as a transmitter.
0: SMBus in Receiver Mode.
1: SMBus in Transmitter Mode.
Bit5:
STA: SMBus Start Flag.
Write:
0: No Start generated.
1: When operating as a master, a START condition is transmitted if the bus is free (If the bus
is not free, the START is transmitted after a STOP is received or a free timeout is detected).
If STA is set by software as an active Master, a repeated START will be generated after the
next ACK cycle.
Read:
0: No Start or repeated Start detected.
1: Start or repeated Start detected.
Bit4:
STO: SMBus Stop Flag.
Write:
As a master, setting this bit to ‘1’ causes a STOP condition to be transmitted after the next
ACK cycle. STO is cleared to ‘0’ by hardware when the STOP is generated.
As a slave, software manages this bit when switching from Slave Receiver to Slave Trans-
mitter mode. See Section 13.5.4 for details.
Read:
0: No Stop condition detected.
1: Stop condition detected (if in Slave Mode) or pending (if in Master Mode).
Bit3:
ACKRQ: SMBus Acknowledge Request.
This read-only bit is set to logic 1 when the SMBus has received a byte and needs the ACK
bit to be written with the correct ACK response value.
Bit2:
ARBLOST: SMBus Arbitration Lost Indicator.
This read-only bit is set to logic 1 when the SMBus loses arbitration while operating as a
transmitter. A lost arbitration while a slave indicates a bus error condition.
Bit1:
ACK: SMBus Acknowledge Flag.
This bit defines the outgoing ACK level and records incoming ACK levels. It should be writ-
ten each time a byte is received (when ACKRQ=1), or read after each byte is transmitted.
0: A "not acknowledge" has been received (if in Transmitter Mode) OR will be transmitted (if
in Receiver Mode).
1: An "acknowledge" has been received (if in Transmitter Mode) OR will be transmitted (if in
Receiver Mode).
Bit0:
SI: SMBus Interrupt Flag.
This bit is set by hardware under the conditions listed in Table 13.3. SI must be cleared by
software. While SI is set, SCL is held low and the SMBus is stalled.
R
R/W
R
R/W
Reset Value
MASTER TXMODE
STA
STO
ACKRQ ARBLOST
ACK
SI
00000000
Bit7
Bit6
Bit5
Bit4
Bit3
Bit2
Bit1
Bit0
SFR Address:
(bit addressable)
0xC0
SMB0CN: SMBus Control
相關PDF資料
PDF描述
TOOLSTICK411DC TOOLSTICK DAUGHTER CARD
TOOLSTICK336DC DAUGHTER CARD TOOLSTICK C8051F33
SDR-2 SCOTCH CODE REFILL # 2
0210490198 CABLE JUMPER 1.25MM .127M 14POS
RSM08DRTH CONN EDGECARD 16POS DIP .156 SLD
相關代理商/技術參數
參數描述
TOOLSTICK300PP 功能描述:插座和適配器 Dev Tool for C8051F30X MCUs RoHS:否 制造商:Silicon Labs 產品:Adapter 用于:EM35x
TOOLSTICK300SPP 功能描述:插座和適配器 TS for F300-F305 SOIC 14 MCUs RoHS:否 制造商:Silicon Labs 產品:Adapter 用于:EM35x
TOOLSTICK310PP 功能描述:插座和適配器 C8051F310/12/14 F361 F364 F366 F368 RoHS:否 制造商:Silicon Labs 產品:Adapter 用于:EM35x
TOOLSTICK311DC 功能描述:子卡和OEM板 ToolStick C8051F311 Daughter Card RoHS:否 制造商:BeagleBoard by CircuitCo 產品:BeagleBone LCD4 Boards 用于:BeagleBone - BB-Bone - Open Source Development Kit
TOOLSTICK311PP 功能描述:插座和適配器 C8051F311/13/15 F362 F365 F367 F369 RoHS:否 制造商:Silicon Labs 產品:Adapter 用于:EM35x
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*