參數資料
型號： SC16C654IB64,128
廠商： NXP SEMICONDUCTORS
元件分類： 微控制器/微處理器
英文描述： 4 CHANNEL(S), 5M bps, SERIAL COMM CONTROLLER, PQFP64
封裝： 10 X 10 MM, 1.40 MM HEIGHT, PLASTIC, MS-026, SOT-314-2, LQFP-64
文件頁數： 25/52頁
文件大?。?/td> 647K
代理商： SC16C654IB64,128
Philips Semiconductors
SC16C654/654D
Quad UART with 64-byte FIFO and infrared (IrDA) encoder/decoder
Product data
Rev. 04 — 19 June 2003
31 of 52
9397 750 11617
Koninklijke Philips Electronics N.V. 2003. All rights reserved.
[1]
Whenever any MSR bit 0-3 is set to logic 1, a Modem Status Interrupt will be generated.
7.9 Scratchpad Register (SPR)
The SC16C654/654D provides a temporary data register to store 8 bits of user
information.
7.10 Enhanced Feature Register (EFR)
Enhanced features are enabled or disabled using this register.
Bits 0 through 4 provide single or dual character software ow control selection.
When the Xon1 and Xon2 and/or Xoff1 and Xoff2 modes are selected, the double
8-bit words are concatenated into two sequential numbers.
1
MSR[1]
DSR [1]
Logic 0 = No DSR change (normal default condition).
Logic1=The DSR input to the SC16C654/654D has changed state
since the last time it was read. A Modem Status Interrupt will be
generated.
0
MSR[0]
CTS [1]
Logic 0 = No CTS change (normal default condition).
Logic 1 = The CTS input to the SC16C654/654D has changed state
since the last time it was read. A Modem Status Interrupt will be
generated.
Table 21:
Modem Status Register bits description…continued
Bit
Symbol
Description
Table 22:
Enhanced Feature Register bits description
Bit
Symbol
Description
7
EFR[7]
Auto CTS. Automatic CTS Flow Control.
Logic 0 = Automatic CTS ow control is disabled (normal default
condition).
Logic 1 = Enable Automatic CTS ow control. Transmission will stop
when CTS goes to a logical 1. Transmission will resume when the CTS
pin returns to a logical 0.
6
EFR[6]
Auto RTS. Automatic RTS may be used for hardware ow control by
enabling EFR[6]. When Auto RTS is selected, an interrupt will be
generated when the receive FIFO is lled to the programmed trigger
level and RTS will go to a logic 1 at the next trigger level. RTS will return
to a logic 0 when data is unloaded below the next lower trigger level
(Programmed trigger level -1). The state of this register bit changes with
the status of the hardware ow control. RTS functions normally when
hardware ow control is disabled.
Logic 0 = Automatic RTS ow control is disabled (normal default
condition).
Logic 1 = Enable Automatic RTS ow control.
相關PDF資料
PDF描述
SC16C654IA68,512 4 CHANNEL(S), 5M bps, SERIAL COMM CONTROLLER, PQCC68
SC18005CQ SPECIALTY MICROPROCESSOR CIRCUIT, PQFP144
SC18IS600IBS,151 I2C BUS CONTROLLER, PQCC24
SC18IS600IBS I2C BUS CONTROLLER, PQCC24
SC2200UCL-300 32-BIT, 300 MHz, MICROPROCESSOR, PBGA432
相關代理商/技術參數
參數描述
SC16C750 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Universal Asynchronous Receiver/Transmitter (UART) with 64-byte FIFO
SC16C750B 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:5 V, 3.3 V and 2.5 V UART with 64-byte FIFOs
SC16C750BIA44 功能描述:UART 接口集成電路 16CB 2.5V-5V 1CH UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C750BIA44,512 功能描述:UART 接口集成電路 16CB 2.5V-5V 1CH RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
SC16C750BIA44,518 功能描述:UART 接口集成電路 1CH. UART 64B FIFO RoHS:否 制造商:Texas Instruments 通道數量:2 數據速率:3 Mbps 電源電壓-最大:3.6 V 電源電壓-最小:2.7 V 電源電流:20 mA 最大工作溫度:+ 85 C 最小工作溫度:- 40 C 封裝 / 箱體:LQFP-48 封裝:Reel
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*