參數資料
型號: S1D13305F00B
元件分類: 顯示控制器
英文描述: 640 X 256 PIXELS CRT CHAR OR GRPH DSPL CTLR, PQFP60
封裝: QFP6-60
文件頁數: 57/94頁
文件大小: 541K
代理商: S1D13305F00B
54
EPSON
S1D13305 Series
Technical Manual
10. CHARACTER GENERATOR
10.1. CG Characteristics
10.1.1. Internal character generator
The internal character generator is recommended for
minimum system configurations containing a S1D13305
series, display RAM, LCD panel, single-chip micropro-
cessor and power supply. Since the internal character
generator uses a CMOS mask ROM, it is also recom-
mended for low-power applications.
5
× 7-pixel font (See Section 17.)
160 JIS standard characters
Can be mixed with character generator RAM (maxi-
mum of 64 CG RAM characters)
Can be automatically spaced out up to 8
× 16 pixels
10.1.2. External character generator ROM
The external CG ROM can be used when fonts other than
those in the internal ROM are needed. Data is stored in the
external ROM in the same format used in the internal
ROM. (See Section 10.3.)
Up to 8
× 8-pixel characters (M2 = 0) or 8 × 16-pixel
characters (M2 = 1)
Up to 256 characters (192 if used together with the
internal ROM)
Mapped into the display memory address space at
F000H to F7FFH (M2 = 0) or F000H to FFFFH (M2
= 1)
Characters can be up to 8
× 16-pixels; however, excess
bits must be set to zero.
10.1.3. Character generator RAM
The user can freely use the character generator RAM for
storing graphics characters. The character generator RAM
can be mapped by the microprocessor anywhere in dis-
play memory, allowing effective use of unused address
space.
Up to 8
× 8-pixel characters (M2 = 0) or 8 × 16
characters (M2 = 1)
Up to 256 characters if mapped at F000H to FFFFH
(64 if used together with character generator ROM)
Can be mapped anywhere in display memory address
space if used with the character generator ROM
Mapped into the display memory address space at
F000H to F7FFH if not used with the character gen-
erator ROM (more than 64 characters are in the CG
RAM). Set SAG0 to F000H and M1 to zero when
defining characters number 193 upwards.
CHARACTER GENERATOR
相關PDF資料
PDF描述
S1D13305F00A 640 X 256 PIXELS CRT CHAR OR GRPH DSPL CTLR, PQFP60
S1D13600F00A CRT OR FLAT PNL GRPH DSPL CTLR, PQFP64
S1D13700F02A100 320 X 240 PIXELS CRT OR FLAT PNL GRPH DSPL CTLR, PQFP64
S1D13706F00A 320 X 240 PIXELS CRT OR FLAT PNL GRPH DSPL CTLR, PQFP100
S1D13806F00A CRT OR FLAT PNL GRPH DSPL CTLR, PQFP144
相關代理商/技術參數
參數描述
S1D13305F00B100 制造商:Epson Electronics America Inc 功能描述:LCD DRVR 3V/3.3V/5V 80-Pin TQFP
S1D13501F00A100 制造商:Epson Electronics America Inc 功能描述:LCD DRVR 3V/3.3V/5V 80-Pin TQFP
S1D13502F00B100 制造商:Epson Electronics America Inc 功能描述:LCD DRVR 3V/3.3V/5V 80-Pin TQFP
S1D13502F00B200 功能描述:LCD 驅動器 LCD CONTROLLER RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube
S1D13503 制造商:EPSON 制造商全稱:EPSON 功能描述: