參數資料
型號： S1D13305F00B
元件分類： 顯示控制器
英文描述： 640 X 256 PIXELS CRT CHAR OR GRPH DSPL CTLR, PQFP60
封裝： QFP6-60
文件頁數： 5/94頁
文件大小： 541K
代理商： S1D13305F00B
S1D13305 Series
EPSON
7
Technical Manual
5.2.5. LCD drive signals
In order to provide effective low-power drive for LCD
matrixes, the S1D13305 series can directly control both
the X- and Y-drivers using an enable chain.
Pin Name
Function
XD0 to XD3
4-bit X-driver (column drive) data outputs. Connect these outputs to the inputs of the X-driver
chips.
The falling edge of XSCL latches the data on XD0 to XD3 into the input shift registers of the
X-drivers. To conserve power, this clock halts between LP and the start of the following display
line (See section 6.3.7).
XECL
The falling edge of XECL triggers the enable chain cascade for the X-drivers.
Every 16th clock pulse is output to the next X-driver.
LP latches the signal in the X-driver shift registers into the output data latches. LP is a falling-
edge triggered signal, and pulses once every display line.
Connect LP to the Y-driver shift clock on modules.
WF
LCD panel AC drive output. The WF period is selected to be one of two values with SYSTEM
SET command.
The falling edge of YSCL latches the data on YD into the input shift registers of the
Y-drivers. YSCL is not used with driver ICs which use LP as the Y-driver shift clock.
YD is the data pulse output for the Y drivers. It is active during the last line of each frame, and
is shifted through the Y drivers one by one (by YSCL), to scan the display’s common
connections.
Power-down output signal. YDIS is HIGH while the display drive outputs are active.
YDIS goes LOW one or two frames after the sleep command is written to the S1D13305
series. All Y-driver outputs are forced to an intermediate level (de-selecting the display
segments) to blank the display. In order to implement power-down operation in the LCD unit,
the LCD power drive supplies must also be disabled when the display is disabled by YDIS.
XSCL
LP
YSCL
YD
YDIS
PIN DESCRIPTION/SPECIFICATIONS
6. SPECIFICATIONS
6.1. Absolute Maximum Ratings
Parameter
Symbol
Rating
Unit
Supply voltage range
VDD
–0.3 to 7.0
Input voltage range
VIN
–0.3 to VDD + 0.3
V
Power dissipation
PD
300
mW
Operating temperature range
Topg
–20 to 75
°C
Storage temperature range
Tstg
–65 to 150
°C
Soldering temperature (10 seconds). See note 1.
Tsolder
260
°C
Notes:
1. The humidity resistance of the flat package may be reduced if the package is immersed in solder. Use a soldering technique
that does not heatstress the package.
2. If the power supply has a high impedance, a large voltage differential can occur between the input and supply voltages. Take
appropriate care with the power supply and the layout of the supply lines. (See section 6.2.)
3. All supply voltages are referenced to VSS = 0V.
相關PDF資料
PDF描述
S1D13305F00A 640 X 256 PIXELS CRT CHAR OR GRPH DSPL CTLR, PQFP60
S1D13600F00A CRT OR FLAT PNL GRPH DSPL CTLR, PQFP64
S1D13700F02A100 320 X 240 PIXELS CRT OR FLAT PNL GRPH DSPL CTLR, PQFP64
S1D13706F00A 320 X 240 PIXELS CRT OR FLAT PNL GRPH DSPL CTLR, PQFP100
S1D13806F00A CRT OR FLAT PNL GRPH DSPL CTLR, PQFP144
相關代理商/技術參數
參數描述
S1D13305F00B100 制造商:Epson Electronics America Inc 功能描述:LCD DRVR 3V/3.3V/5V 80-Pin TQFP
S1D13501F00A100 制造商:Epson Electronics America Inc 功能描述:LCD DRVR 3V/3.3V/5V 80-Pin TQFP
S1D13502F00B100 制造商:Epson Electronics America Inc 功能描述:LCD DRVR 3V/3.3V/5V 80-Pin TQFP
S1D13502F00B200 功能描述:LCD 驅動器 LCD CONTROLLER RoHS:否 制造商:Maxim Integrated 數位數量:4.5 片段數量:30 最大時鐘頻率:19 KHz 工作電源電壓:3 V to 3.6 V 最大工作溫度:+ 85 C 最小工作溫度:- 20 C 封裝 / 箱體:PDIP-40 封裝:Tube
S1D13503 制造商:EPSON 制造商全稱:EPSON 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*