參數資料
型號: PNX3000N3
廠商: NXP Semiconductors N.V.
英文描述: Analog front end for digital video processors
中文描述: 模擬前端數字視頻處理器
文件頁數: 48/51頁
文件大?。?/td> 285K
代理商: PNX3000N3
2004 Oct 04
48
Philips Semiconductors
Preliminary specification
Analog front end for digital video
processors
PNX3000
15.5
Suitability of surface mount IC packages for wave and reflow soldering methods
Notes
1.
For more detailed information on the BGA packages refer to the“(LF)BGA Application Note”(AN01026); order a copy
from your Philips Semiconductors sales office.
All surface mount (SMD) packages are moisture sensitive. Depending upon the moisture content, the maximum
temperature (with respect to time) and body size of the package, there is a risk that internal or external package
cracks may occur due to vaporization of the moisture in them (the so called popcorn effect). For details, refer to the
Drypack information in the “Data Handbook IC26; Integrated Circuit Packages; Section: Packing Methods”
These transparent plastic packages are extremely sensitive to reflow soldering conditions and must on no account
be processed through more than one soldering cycle or subjected to infrared reflow soldering with peak temperature
exceeding 217
°
C
±
10
°
C measured in the atmosphere of the reflow oven. The package body peak temperature
must be kept as low as possible.
These packages are not suitable for wave soldering. On versions with the heatsink on the bottom side, the solder
cannot penetrate between the printed-circuit board and the heatsink. On versions with the heatsink on the top side,
the solder might be deposited on the heatsink surface.
If wave soldering is considered, then the package must be placed at a 45
°
angle to the solder wave direction.
The package footprint must incorporate solder thieves downstream and at the side corners.
Wave soldering is suitable for LQFP, QFP and TQFP packages with a pitch (e) larger than 0.8 mm; it is definitely not
suitable for packages with a pitch (e) equal to or smaller than 0.65 mm.
Wave soldering is suitable for SSOP, TSSOP, VSO and VSSOP packages with a pitch (e) equal to or larger than
0.65 mm; it is definitely not suitable for packages with a pitch (e) equal to or smaller than 0.5 mm.
Image sensor packages in principle should not be soldered. They are mounted in sockets or delivered pre-mounted
on flex foil. However, the image sensor package can be mounted by the client on a flex foil by using a hot bar
soldering process. The appropriate soldering profile can be provided on request.
Hot bar soldering or manual soldering is suitable for PMFP packages.
2.
3.
4.
5.
6.
7.
8.
9.
PACKAGE
(1)
SOLDERING METHOD
WAVE
REFLOW
(2)
BGA, HTSSON..T
(3)
, LBGA, LFBGA, SQFP, SSOP..T
(3)
, TFBGA,
VFBGA, XSON
DHVQFN, HBCC, HBGA, HLQFP, HSO, HSOP, HSQFP, HSSON,
HTQFP, HTSSOP, HVQFN, HVSON, SMS
PLCC
(5)
, SO, SOJ
LQFP, QFP, TQFP
SSOP, TSSOP, VSO, VSSOP
CWQCCN..L
(8)
, PMFP
(9)
, WQCCN..L
(8)
not suitable
suitable
not suitable
(4)
suitable
suitable
not recommended
(5)(6)
not recommended
(7)
not suitable
suitable
suitable
suitable
not suitable
相關PDF資料
PDF描述
PNX8510 Analog companion chip
PNX8511 Analog companion chip
PNX8526 Programmable source decoder with integrated peripherals
PNX8526EH Programmable source decoder with integrated peripherals
PPC5001T NPN microwave power transistor
相關代理商/技術參數
參數描述
PNX41AB00-1412 功能描述:環形MIL規格應變消除裝置與適配器 RoHS:否 制造商:Amphenol Industrial 產品:Cable Clamps 類型:Bushing Cable Clamps MIL 類型:MIL-DTL-5015 系列:97 外殼大小:16S, 16 匹配樣式:Threaded 主體材料:Aluminum Alloy 主體類型:Straight
PNX5209L0474AUM 制造商:ST-Ericsson 功能描述:IC RF AFE W/PMU 280LFBGA
PNX5220EL6303AUM 制造商:STMicroelectronics 功能描述:
PNX6705L4321UM 制造商:St-Nxp Wireless Merger 功能描述:TD BASEBAND
PNX6706L4321UM 制造商:St-Nxp Wireless Merger 功能描述:BASEBAND