參數資料
型號： MT9171AE1
廠商： ZARLINK SEMICONDUCTOR INC
元件分類： 數字傳輸電路
英文描述： Digital Subscriber Interface Circuit Digital Network Interface Circuit
中文描述： DATACOM, DIGITAL SLIC, PDIP22
封裝： LEAD FREE, PLASTIC, DIP-22
文件頁數： 12/28頁
文件大小： 552K
代理商： MT9171AE1
MT9171/72
Data Sheet
12
Zarlink Semiconductor Inc.
Table 4 - Control Register
Notes:
1.
Suggested use of ATTACK:
-At 160 kbit/s full convergence requires 850 ms with ATTACK held high for the first 240 frames or 30 ms.
-At 80 kbit/s full convergence requires 1.75 s with ATTACK held high for the first 480 frames or 60 ms.
When bits 4-7 of the Control Register are all set to one, the DNIC operates in one of the default modes as defined in Table 4a,
depending upon the status of bit-3.
2.
Table 4a - Default Mode Selection
Notes:
3
4.
Default Mode 1 can also be selected by tying CDSTi/CDi pin low when DNIC is operating in dual mode.
Default Mode 2 can also be selected by tying CDSTi/CDi pin high when DNIC is operating in dual mode.
6
ATTACK
2
Convergence Speedup. When set to ’1’, the echo canceller will converge to the reflection
coefficient much faster. Used on power-up for fast convergence.
1
When ’0’, the echo
canceller will require the normal amount of time to converge to a reflection coefficient.
7
TxHK
2
Transmit Housekeeping. When set to ’0’, logic zero is transmitted over the line as
Housekeeping Bit. When set to ’1’, logic one is transmitted over the line as
Housekeeping Bit.
C-Channel
(Bit 0-7)
Internal Control
Register
Internal Diagnostic
Register
Description
XXX01111
00000000
01000000
Default Mode-1
3
: Bit rate is 80 kbit/s. ATTACK,
PSEN, DINB, DRR and all diagnostics are disabled.
TxHK=0.
Default Mode-2
4
Bit rate is 160 kbit/s. ATTACK,
PSEN, DINB, DRR and all diagnostics are disabled.
TxHK=0.
XXX11111
00010000
01000000
Bit
Name
Description
0
Reg Sel-1
Register Select-1. Must be set to ’0’ to select the Diagnostic Register.
1
Reg Sel-2
Register Select-2. Must be set to ’1’ to select the Diagnostic Register.
2,3
Loopback
Bit 2
0
0
1
1
Bit 3
0
1
0
1
All loopback testing functions disabled. Normal operation.
DSTi internally looped back into DSTo for system diagnostics.
L
OUT
is internally looped back into L
IN
for system diagnostics.
2
DSTo is internally looped back into DSTi for end-to-end testing.
3
Bit
Name
Description
bit 0
bit 1
bit 2
bit 3
bit 4
bit 5
bit 6
bit 7
Reg Sel-1
Reg Sel-2
DRR
BRS
DINB
PSEN
ATTACK
TxHK
Default Mode Selection (Refer to Table 4a)
bit 0
bit 1
bit 2
bit 3
bit 4
bit 5
bit 6
bit 7
Reg Sel-1
Reg Sel-2
Loopback
FUN
PSWAP
DLO
Not Used
Default Mode Selection
(Refer to Table 4a)
相關PDF資料
PDF描述
MT9171 ISO2-CMOS ST-BUS FAMILY
MT9171AE ISO2-CMOS ST-BUS FAMILY
MT9171AN ISO2-CMOS ST-BUS FAMILY
MT9171AP ISO2-CMOS ST-BUS FAMILY
MT9171 ISO2-CMOS ST-BUS⑩ FAMILY Digital Subscriber Interface Circuit Digital Network Interface Circuit
相關代理商/技術參數
參數描述
MT9171AN 制造商:Microsemi Corporation 功能描述:
MT9171AN1 制造商:Zarlink Semiconductor Inc 功能描述:PB FREE DNIC 1.5UM - Rail/Tube
MT9171ANR 制造商:ZARLINK 制造商全稱:Zarlink Semiconductor Inc 功能描述:Digital Subscriber Interface Circuit Digital Network Interface Circuit
MT9171ANR1 制造商:Microsemi Corporation 功能描述:PB FREE DNIC 1.5MM - Tape and Reel 制造商:Zarlink Semiconductor Inc 功能描述:PB FREE DNIC 1.5MM - Tape and Reel
MT9171AP 制造商:ZARLINK 制造商全稱:Zarlink Semiconductor Inc 功能描述:ISO2-CMOS ST-BUS FAMILY
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*