
Electrical Characteristics
MPC560xS Microcontroller Data Sheet, Rev. 2
Preliminary—Subject to Change Without Notice
Freescale Semiconductor
41
NOTE
Stresses exceeding the recommended absolute maximum ratings may cause permanent
damage to the device. This is a stress rating only and functional operation of the device at
these or any other conditions above those indicated in the operational sections of this
specification are not implied. Exposure to absolute maximum rating conditions for
extended periods may affect device reliability. During overload conditions (VIN >VDD or
VIN <VSS), the voltage on pins with respect to ground (VSS) must not exceed the
recommended values.
3.4.1
Recommended Operating Conditions
NOTE
Minimum slew rate for the supplies to ramp up should be 1 second, which is slowest
ramp-up time.
VIN
SR C Voltage on any GPIO pin with respect to ground
(VSS)
0.3
5.5
V
C
Relative to VDD
0.3
VDD + 0.3
IINJPAD
SR C Injected input current on any pin during
overload condition
10
mA
IINJSUM
SR C Absolute sum of all injected input currents
during overload condition
50
TSTORAGE SR C Storage temperature
55
150
°C
1 Throughout the remainder of this document V
DD refers collectively to I/O voltage supplies, i.e., VDDE_A, VDDE_B,
VDDE_C, VDDE_E, VDDMA, VDDMB and VDDMC, unless otherwise noted.
2 Throughout the remainder of this document V
SS refers collectively to I/O voltage supply grounds, i.e., VSSE_A,
VSSE_B, VSSE_C, VSSE_E, VSSMA, VSSMB and VSSMC, unless otherwise noted.
Table 12. Recommended Operating Conditions (3.3 V)
Symbol
C
Parameter
Conditions
Value
Unit
Min
Max
VDDA
1
SR C Voltage on VDDA pin (ADC reference) with
respect to ground (VSS)
3.0
3.6
V
C
Relative to VDD
VDD 0.1
VDD + 0.1
VSSA
SR C Voltage on VSSA (ADC reference) pin with
respect to VSS
VSS 0.1
VSS + 0.1
V
VDDPLL CC C Voltage on VDDPLL (1.2 V PLL supply) pin
with respect to ground (VSSPLL)
1.08
1.32
V
VSSPLL SR C Voltage on VSSMC (stepper motor supply
ground) pin with respect to VSS
VSS 0.1
VSS + 0.1
V
VDDR
2
SR C Voltage on VDDR pin (regulator supply) with
respect to ground (VSSR)
3.0
3.6
V
C
Relative to VDD
VDD 0.1
VDD + 0.1
Table 11. Absolute Maximum Ratings (continued)
Symbol
C
Parameter
Conditions
Value
Unit
Min
Max