參數資料
型號: LMX2512LQX0967/NOPB
廠商: NATIONAL SEMICONDUCTOR CORP
元件分類: PLL合成/DDS/VCOs
英文描述: PLL FREQUENCY SYNTHESIZER, 19.68 MHz, QCC28
封裝: 5 X 5 MM, 0.75 MM HEIGHT, LLP-28
文件頁數: 5/18頁
文件大?。?/td> 184K
代理商: LMX2512LQX0967/NOPB
Programming Description (Continued)
R1 REGISTER
The R1 register address bits (R1 [1:0]) are “01”.
The IF_FREQ bits selects the default IF frequency applicable to the specific CDMA system. For the LMX2502 the default IF
frequency is 440.76 MHz, and for the LMX2512 the default IF frequencies are 367.20 MHz and 170.76 MHz, depending on
variant.
Reference Frequency Selection bit (OSC_FREQ) selects either 19.20 MHz or 19.68 MHz for the reference oscillator frequency.
The internal spurious reduction scheme is controlled by the SPUR_RDT [1:0] bits. There are two different spur reduction
schemes: a continuous tracking mode and a single optimization mode. The continuous tracking mode will adjust for variations in
voltage and temperature. The single optimization mode fixes the internal compensation parameters only when the PLL goes into
the locked state. The spur reduction can also be disabled, but it is recommended that the continuous mode be used for normal
operation.
The OB_CRL [1:0] bits determine the power level of the RF output buffer. The power level can be set according to the system
requirement.
The two bits, RF_EN and IF_EN, logically select the active state of the RF synthesizer system and the IF PLL, respectively. The
entire IC can be placed in a power down state by using the CE control pin (pin 20).
R1 REGISTER
Register
MSB
SHIFT REGISTER BIT LOCATION
LSB
23
22 21
20 19 18 17 16 15 14 13 12
11
10 98765
4
3
2
1
0
Data Field
Address
Field
R1
(Default)
IF_
FREQ
[1:0]
OSC_
FREQ
10000000
SPUR_
RDT
[1:0]
0
0101OB_
CRL
[1:0]
RF_
EN
IF_
EN
01
Name
Functions
IF_FREQ [1:0]
IF Frequency Selection
00 = 170.76 MHz (LMX2512LQ0967)
01 = 367.20 MHz (LMX2512LQ1065)
10 = 440.76 MHz (LMX2502LQ1635)
OSC_FREQ
Reference Frequency Selection
0 = 19.20 MHz
1 = 19.68 MHz
SPUR_RDT [1:0]
Spur Reduction Scheme
00 = No spur reduction
01 = Not Used
10 = Continuous tracking of variation (Recommended)
11 = One time optimization
OB_CRL [1:0]
RF Output Power Control
00 = Minimum Output Power
01 =
10 =
11 = Maximum Output Power
RF_EN
RF Enable
0=RFOff
1=RFOn
IF_EN
IF Enable
0=IFOff
1=IFOn
LMX2502/LMX2512
www.national.com
13
相關PDF資料
PDF描述
LMX2515LQX0701/NOPB PLL FREQUENCY SYNTHESIZER, 26 MHz, QCC28
LMX2525LQ1321/NOPB PLL FREQUENCY SYNTHESIZER, 26 MHz, QCC24
LMZ12001EXTTZE SWITCHING REGULATOR, 1000 kHz SWITCHING FREQ-MAX, PSSO7
LMZ12001TZE-ADJ SWITCHING REGULATOR, 1000 kHz SWITCHING FREQ-MAX, PSSO7
LMZ12002EXTTZX-ADJ SWITCHING REGULATOR, PSSO7
相關代理商/技術參數
參數描述
LMX2512LQX1065 功能描述:IC SYNTHESIZER PLL VCO 28-LLP RoHS:是 類別:RF/IF 和 RFID >> RF 其它 IC 和模塊 系列:PLLatinum™ 標準包裝:100 系列:*
LMX2512LQX1065/NOPB 制造商:Texas Instruments 功能描述:PLL Frequency Synthesizer Single 367.2MHz 28-Pin LLP EP T/R
LMX2515 制造商:NSC 制造商全稱:National Semiconductor 功能描述:PLLatinum⑩ Frequency Synthesizer System with Integrated VCO
LMX2515LQ0701 制造商:Texas Instruments 功能描述:IC PLL VCO SMD 2515 LLP-28
LMX2515LQ0701/NOPB 功能描述:IC SYNTHESIZER FREQ PLL 28-LLP RoHS:是 類別:RF/IF 和 RFID >> RF 其它 IC 和模塊 系列:PLLatinum™ 標準包裝:100 系列:*