
CAUTION
ELECTROSTATIC SENSITIVE DEVICES
DO NOT OPEN PACKAGES OR HANDLE
EXCEPT AT A STATIC-FREE WORKSTATION
GENNUM CORPORATION
Mailing Address: P.O. Box 489, Stn. A, Burlington, Ontario, Canada L7R 3Y3
Shipping Address: 970 Fraser Drive, Burlington, Ontario, Canada L7L 5P5
Tel. +1 (905) 632-2996 Fax. +1 (905) 632-5946
GENNUM JAPAN CORPORATION
Shinjuku Green Tower Building 27F, 6-14-1, Nishi Shinjuku, Shinjuku-ku, Tokyo, 160-0023 Japan
Tel. +81 (03) 3349-5501, Fax. +81 (03) 3349-5505
GENNUM UK LIMITED
25 Long Garden Walk, Farnham, Surrey, England GU9 7HX
Tel. +44 (0)1252 747 000 Fax +44 (0)1252 726 523
Gennum Corporation assumes no liability for any errors or omissions in this document, or for the use of the
circuits or devices described herein. The sale of the circuit or device described herein does not imply any
patent license, and Gennum makes no representation that the circuit or device is free from patent infringement.
GENNUM and the G logo are registered trademarks of Gennum Corporation.
Copyright 2003 Gennum Corporation. All rights reserved. Printed in Canada.
www.gennum.com
GS1560A/GS1561 Data Sheet
27360 - 8
September 2005
80
80 of 80
DOCUMENT IDENTIFICATION
DATA SHEET
The product is in production. Gennum reserves the right to make
changes to the product at any time without notice to improve reliability,
function or design, in order to provide the best product possible.
7. Revision History
Version
ECR
Date
Changes and / or Modifications
2
129633
July 2003
Cleaned up host interface tables, added missing information, corrected pin names and other
minor typing errors. Added Section 3.15.
3
131651
August 2003
Corrected internal register addresses. Modified pin 11 and pin 25 descriptions. Corrected minor
typing errors.
4
132457
October 2003
Added note under PIN DESCRIPTION of pin11 (SD/HD) to indicate that there is a 100k internal
pull-up resistor on this pin. PIN DESCRIPTION of TERM pins was corrected to read "... but
should be connected to EQ_GND" instead of PDBUFF_GND. Text in Section 3.10.4.1 changed
to read "INT_PROG bit will be set HIGH (instead of LOW) for progressive scan. GSPI r/w
Timing Diagram updated. Change "three" to "two" in Section 3.7.1 paragraph 2.
5
133859
May 2004
Converted GS1560A data sheet to new template format. Merged data sheets for the GS1560A
and GS1561. Moved ESD to maximum absolute ratings. Modified description of LOCKED pin
in Data Through mode. Added note to host interface pins. Text in Table 4-7 changed to read
“INT_PROG” and "Interlace/Progressive: Set LOW if detected video standard is
PROGRESSIVE and is set HIGH if it is INTERLACED”. Added Pb-free and Green availability
and ordering information. Added Pb-free reflow solder profile. Corrected minor typing errors.
6
134906
April 2005
Added Solder Reflow Profile description. Clarified setting of VD_STD[4:0], INT_PROG and
STD_LOCK bits following a reset and/or removal of input. Minor correction to Typical
Application Circuits for both parts. Added DVB-ASI Packet Counter information. Added
Packaging Data section. Changed ‘Green’ references to RoHS Compliant.
7
136978
June 2005
Restored missing overlines to pin names. Corrected missing TERM pin in Serial Digital Input
connection diagram. Rephrased RoHS compliance statement.
8
137405
September 2005
Conversion to Data Sheet. Added note on max device power and current to
Table 2-1: DC
Electrical Characteristics
. Corrected Solder Reflow Profile labels.