參數資料
型號： GS1560ACF
廠商： Gennum Corporation
英文描述： GS1560A/GS1561 HD-LINX-R II Dual-Rate Deserializer
中文描述： GS1560A/GS1561的HD - LINX進程- R的第二雙率解串器
文件頁數： 52/80頁
文件大?。?/td> 842K
代理商： GS1560ACF
GS1560A/GS1561 Data Sheet
27360 - 8
September 2005
52 of 80
3.10.3 SMPTE 352M Payload Identifier
The GS1560A/GS1561 can receive and detect the presence of the SMPTE 352M
payload identifier ancillary data packet. This four word payload identifier packet
may be used to indicate the transport mechanism, frame rate and line scanning /
sampling structure.
Upon reception of this packet, the device will extract the four words describing the
video format being transported and make this information available to the host
interface via the four VIDEO_FORMAT_OUT registers (
Table 3-6
).
The VIDEO_FORMAT_OUT registers will only be updated if the received
checksum is the same as the locally calculated checksum.
These registers will be cleared to zero, indicating an undefined format, if the device
loses lock to the input data stream (LOCKED = LOW), or if the SMPTE_BYPASS
pin is asserted LOW. This is also the default setting after device reset.
The SMPTE 352M packet should be received once per field for interlaced systems
and once per frame for progressive systems. If the packet is not received for two
complete video frames, the VIDEO_FORMAT_OUT registers will be cleared to
zero.
3.10.4 Automatic Video Standard and Data Format Detection
The GS1560A/GS1561 can independently detect the input video standard and
data format by using the timing parameters extracted from the received TRS ID
words. This information is presented to the host interface via the
VIDEO_STANDARD register (
Table 3-7
).
Total samples per line, active samples per line, total lines per field/frame and active
lines per field/frame are also calculated and presented to the host interface via the
RASTER_STRUCTURE registers (
Table 3-8
). These line and sample count
registers are updated once per frame at the end of line 12. This is in addition to the
information contained in the VIDEO_STANDARD register.
After device reset, the four RASTER_STRUCTURE registers default to zero.
Table 3-6: Host Interface Description for SMPTE 352M Payload Identifier Registers
Register Name
Bit
Name
Description
R/W
Default
VIDEO_FORMAT_OUT_B
Address: 00Dh
15-8
SMPTE352M
Byte 4
Data will be available in this register when Video Payload
Identification Packets are detected in the data stream.
R
0
7-0
SMPTE352M
Byte 3
Data will be available in this register when Video Payload
Identification Packets are detected in the data stream.
R
0
VIDEO_FORMAT_OUT_A
Address: 00Ch
15-8
SMPTE352M
Byte 2
Data will be available in this register when Video Payload
Identification Packets are detected in the data stream.
R
0
7-0
SMPTE352M
Byte 1
Data will be available in this register when Video Payload
Identification Packets are detected in the data stream.
R
0
相關PDF資料
PDF描述
GS1560A GS1560A/GS1561 HD-LINX-R II Dual-Rate Deserializer
GS1560ACFE3 GS1560A/GS1561 HD-LINX-R II Dual-Rate Deserializer
GS1561-CF GS1560A/GS1561 HD-LINX-R II Dual-Rate Deserializer
GS1561-CFE3 GS1560A/GS1561 HD-LINX-R II Dual-Rate Deserializer
GS1574A GS1574A HD-LINX-R II Adaptive Cable Equalizer
相關代理商/技術參數
參數描述
GS1560ACFE3 制造商:Semtech Corporation 功能描述:Reclocking deserializer.Receiver for HD/SD/ASI w/ loop through. LQFP80
GS1561 制造商:GENNUM 制造商全稱:GENNUM 功能描述:HD-LINX II Dual-Rate Deserializer
GS1561-CF 制造商:Rochester Electronics LLC 功能描述: 制造商:Gennum Corporation 功能描述:
GS1561-CFE3 制造商:Semtech Corporation 功能描述:Receiver for HD/SD/ASI w/out loop thru
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*