參數資料
型號： GS1559-CB
廠商： Gennum Corporation
英文描述： GS1559 HD-LINX-TM II Multi-Rate Deserializer with Loop-Through Cable Driver
中文描述： GS1559的HD - LINX進程，商標第二多速率解串器與環通電纜驅動器
文件頁數： 45/74頁
文件大小： 686K
代理商： GS1559-CB
GS1559 Data Sheet
30572 - 4
July 2005
45 of 74
4.10.2.1 Programmable Ancillary Data Detection
Although the GS1559 will detect all types of ancillary data by default, it also allows
the host interface to specifically program up to five different ancillary data types for
detection. This is accomplished via the ANC_TYPE register (
Table 4-5
).
For each data type to be detected, the host interface must program the DID and/or
SDID of the ancillary data type of interest. The GS1559 will compare the received
DID and/or SDID with the programmed values and assert YANC and CANC only if
an exact match is found.
If any DID or SDID value is set to zero in the ANC_TYPE register, no comparison
or match will be made for that value. For example, if the DID is programmed but
the SDID is set to zero, the device will detect all ancillary data types matching the
DID value, regardless of the SDID.
In the case where all five DID and SDID values are set to zero, the GS1559 will
detect all ancillary data types. This is the default setting after device reset.
Where one or more, but less than five, DID and/or SDID values have been
programmed, then only those matching ancillary data types will be detected and
indicated.
NOTE 1: The GS1559 will always detect EDH ancillary data packets for EDH error
detection purposes, regardless of which DID/SDID values have been programmed
for ancillary data indication, (see
EDH CRC Error Detection on page 53
).
NOTE 2: See SMPTE 291M for a definition of ancillary data terms.
Table 4-5: Host Interface Description for Programmable Ancillary Data Type Registers
Register Name
Bit
Name
Description
R/W
Default
ANC_TYPE1
Address: 005h
15-8
ANC_TYPE1[15:8]
Used to program the DID for ancillary data detection at
the YANC and CANC output
R/W
0
7-0
ANC_TYPE1[7:0]
Used to program the SDID for ancillary data detection
at the YANC and CANC output.
Should be set to zero if no SDID is present in the
ancillary data packet to be detected.
R/W
0
ANC_TYPE2
Address: 006h
15-8
ANC_TYPE2[15:8]
Used to program the DID for ancillary data detection at
the YANC and CANC output
R/W
0
7-0
ANC_TYPE2[7:0]
Used to program the SDID for ancillary data detection
at the YANC and CANC output.
Should be set to zero if no SDID is present in the
ancillary data packet to be detected.
R/W
0
ANC_TYPE3
Address: 007h
15-8
ANC_TYPE3[15:8]
Used to program the DID for ancillary data detection at
the YANC and CANC output
R/W
0
7-0
ANC_TYPE3[7:0]
Used to program the SDID for ancillary data detection
at the YANC and CANC output.
Should be set to zero if no SDID is present in the
ancillary data packet to be detected.
R/W
0
相關PDF資料
PDF描述
GS1559-CBE2 GS1559 HD-LINX-TM II Multi-Rate Deserializer with Loop-Through Cable Driver
GS2905 500mA CMOS LDO Voltage Regulator
GS2905X15 500mA CMOS LDO Voltage Regulator
GS2905X18 500mA CMOS LDO Voltage Regulator
GS2905X25 500mA CMOS LDO Voltage Regulator
相關代理商/技術參數
參數描述
GS1559CBE2 制造商:Gennum Corporation 功能描述:DESERIALISER HD/SDI/ASI W/DRV 100BGA 制造商:Gennum Corporation 功能描述:DESERIALISER, HD/SDI/ASI, W/DRV, 100BGA
GS1559-CBE2 功能描述:RF, RFID, WIRELESS RoHS:是 類別:集成電路 (IC) >> 接口 - 串行器，解串行器 系列:* 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:1 系列:- 功能:解串器 數據速率:2.5Gbps 輸入類型:串行 輸出類型:并聯 輸入數:- 輸出數:24 電源電壓:1.8 V ~ 3.3 V 工作溫度:-40°C ~ 105°C 安裝類型:表面貼裝 封裝/外殼:64-TQFP 裸露焊盤 供應商設備封裝:64-TQFP-EP（10x10） 包裝:管件
GS1560 制造商:GENNUM 制造商全稱:GENNUM 功能描述:HD-LINX II Voltage Controlled Oscillator
GS1560A 制造商:Gennum Corporation 功能描述:
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*