參數資料
型號: ADV7311KST
廠商: Analog Devices Inc
文件頁數: 44/84頁
文件大小: 0K
描述: IC VID ENC 6-12BIT DAC'S 64LQFP
產品變化通告: ADV7xxx Obsolescence 16/Jan/2012
標準包裝: 1
類型: 視頻編碼器
應用: DVD,SD/HD
電壓 - 電源,模擬: 2.5V
電壓 - 電源,數字: 2.5V
安裝類型: 表面貼裝
封裝/外殼: 64-LQFP
供應商設備封裝: 64-LQFP(14x14)
包裝: 托盤
REV. A
ADV7310/ADV7311
–49–
HD SHARPNESS FILTER CONTROL AND
ADAPTIVE FILTER CONTROL
[Subaddress 20h, 38h–3Dh]
There are three filter modes available on the ADV7310/ADV7311:
sharpness filter mode and two adaptive filter modes.
HD Sharpness Filter Mode
To enhance or attenuate the Y signal in the frequency ranges
shown in the figures below, the following register settings must
be used: HD sharpness filter must be enabled and HD adaptive
filter enable must be set to disabled.
To select one of the 256 individual responses, the according
gain values for each filter, which range from –8 to +7, must
be programmed into the HD sharpness filter gain register at
Address 20h.
HD Adaptive Filter Mode
The HD adaptive filter threshold A, B, C registers, the HD
adaptive filter gain 1, 2, 3 registers, and the HD sharpness gain
register are used in adaptive filter mode. To activate the adaptive
filter control, the HD sharpness filter must be enabled and HD
adaptive filter enable must be enabled.
The derivative of the incoming signal is compared to the three pro-
grammable threshold values: HD adaptive filter threshold A, B, C.
The recommended threshold range is from 16 to 235 although
any value in the range of 0 to 255 can be used.
The edges can then be attenuated with the settings in HD adap-
tive filter gain 1, 2, 3 registers and HD sharpness filter gain
register.
According to the settings of the HD adaptive filter mode control,
there are two adaptive filter modes available:
1. Mode A is used when adaptive filter mode is set to 0. In this
case, Filter B (LPF) will be used in the adaptive filter block.
Also, only the programmed values for Gain B in the HD sharp-
ness filter gain, HD adaptive filter gain 1, 2, 3 are applied when
needed. The Gain A values are fixed and cannot be changed.
2. Mode B is used when adaptive filter mode is set to 1. In this
mode, a cascade of Filter A and Filter B is used. Both set-
tings for Gain A and Gain B in the HD sharpness filter gain,
HD adaptive filter gain 1, 2, 3 become active when needed.
FREQUENCY (MHz)
MAGNITUDE
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
FILTER A RESPONSE (Gain Ka)
FREQUENCY (MHz)
MAGNITUDE
0.5
0.6
0.7
0.8
0.9
1.0
1.1
1.2
1.3
1.4
1.5
FILTER B RESPONSE (Gain Kb)
FREQUENCY (MHz)
MAGNITUDE
RESPONSE
(Linear
Scale)
1.0
1.1
1.2
1.3
1.4
1.5
1.6
02468
10
12
INPUT
SIGNAL:
STEP
FREQUENCY RESPONSE IN SHARPNESS
FILTER MODE WITH Ka = 3 AND Kb = 7
SHARPNESS AND ADAPTIVE FILTER CONTROL BLOCK
Figure 43. Sharpness and Adaptive Filter Control Block
相關PDF資料
PDF描述
ADV7321KSTZ IC VID ENC 6-12BIT DAC'S 64LQFP
ADV7343BSTZ IC ENCODER VIDEO W/DAC 64-LQFP
ADV7391BCPZ IC ENCODER VIDEO W/DAC 32LFCSP
ADV7511KSTZ IC XMITTER HDMI 12BIT 100LQFP
ADV7511WBSWZ IC XMITTER HDMI AUTO 64LQFP
相關代理商/技術參數
參數描述
ADV7311KST 制造商:Analog Devices 功能描述:Video IC
ADV7312 制造商:AD 制造商全稱:Analog Devices 功能描述:Multiformat 11-Bit HDTV Video Encoder
ADV7312KST 制造商:AD 制造商全稱:Analog Devices 功能描述:Multiformat 11-Bit HDTV Video Encoder
ADV7314 制造商:AD 制造商全稱:Analog Devices 功能描述:Multiformat 216 MHz Video Encoder with Six NSV 14-Bit DACs
ADV7314KST 制造商:AD 制造商全稱:Analog Devices 功能描述:Multiformat 216 MHz Video Encoder with Six NSV 14-Bit DACs