- 您現在的位置：買賣IC網 > PDF目錄1990 > ADN2855ACPZ-R7 (Analog Devices Inc)IC CLK/RECOVERY MULTI 32LFCSP PDF資料下載
參數資料
| 型號： | ADN2855ACPZ-R7 |
| 廠商： | Analog Devices Inc |
| 文件頁數： | 8/20頁 |
| 文件大?。?/td> | 0K |
| 描述： | IC CLK/RECOVERY MULTI 32LFCSP |
| 標準包裝： | 1,500 |
| 類型： | 時鐘和數據恢復（CDR） |
| PLL： | 是 |
| 主要目的： | GPON，BPON，GEPON |
| 輸入： | CML |
| 輸出： | LVDS |
| 電路數： | 1 |
| 比率 - 輸入:輸出： | 1:2 |
| 差分 - 輸入:輸出： | 是/是 |
| 頻率 - 最大： | 200MHz |
| 電源電壓： | 3 V ~ 3.6 V |
| 工作溫度： | -40°C ~ 85°C |
| 安裝類型： | 表面貼裝 |
| 封裝/外殼： | 32-VFQFN 裸露焊盤，CSP |
| 供應商設備封裝： | 32-LFCSP-VQ（5x5） |
| 包裝： | 帶卷 (TR) |
ADN2855
Rev. A | Page 16 of 20
Transmission Lines
Use of 50 transmission lines is required for all high frequency
input and output signals to minimize reflections: PIN, NIN,
CLKOUTP, CLKOUTN, DATxP, DATxN (also REFCLKP and
REFCLKN if a high frequency reference clock is used, such as
155.52 MHz). It is also necessary for the PIN/NIN input traces
to be matched in length, and the CLKOUTP/CLKOUTN and
DATxP/DATxN output traces to be matched in length to avoid
skew between the differential traces. All high speed LVDS outputs,
CLKOUTP/CLKOUTN and DATxP/DATxN, require a 100
differential termination at the differential input to the device
being driven by the ADN2855 outputs.
The high speed inputs, PIN and NIN, are internally terminated
with 50 to an internal reference voltage.
As with any high speed mixed-signal design, take care to keep
all high speed digital traces away from sensitive analog nodes.
Soldering Guidelines for Chip Scale Package
The lands on the 32-lead LFCSP are rectangular. The PCB pad
for these should be 0.1 mm longer than the package land length
and 0.05 mm wider than the package land width. The land
should be centered on the pad to ensure that the solder joint
size is maximized. Visit www.analog.com/CP-32-13 for further
details. The bottom of the chip scale package has a central
exposed pad. The pad on the PCB should be at least as large as
this exposed pad. The user must connect the exposed pad to
VEE (GND) using plugged vias so that solder does not leak
through the vias during reflow. This ensures a solid connection
from the exposed pad to VEE.
相關PDF資料 |
PDF描述 |
|---|---|
| ADS1191IPBS | IC AFE 16BIT 8KSPS 1CH 32TQFP |
| ADS1222IPWTG4 | IC 24BIT ADC W/2CH MUX 14-TSSOP |
| ADS1234IPWG4 | IC ADC 24BIT BRDG SENSOR 28TSSOP |
| ADS1241EG4 | IC ADC 24-BIT SER PROGBL 28-SSOP |
| ADS1244IDGSTG4 | IC ADC LP CONVERT 24BIT 10-MSOP |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADN2855XCPZ | 功能描述:IC CLK DATA REC GPON 200MHZ 制造商:analog devices inc. 系列:- 包裝:托盤 零件狀態:上次購買時間 PLL:是 主要用途:GPON，BPON，GEPON 輸入:CML 輸出:LVDS 電路數:1 比率 - 輸入:輸出:1:1 差分 - 輸入:輸出:是/是 頻率 - 最大值:200MHz 電壓 - 電源:3 V ~ 3.6 V 工作溫度:-40°C ~ 85°C 安裝類型:表面貼裝 封裝/外殼:32-WFQFN 裸露焊盤 供應商器件封裝:32-LFCSP-VQ（5x5） 標準包裝:1 |
| ADN2860 | 制造商:AD 制造商全稱:Analog Devices 功能描述:3-Channel Digital Potentiometer with Nonvolatile Memory |
| ADN2860ACPZ25 | 制造商:Rochester Electronics LLC 功能描述: 制造商:Analog Devices 功能描述: |
| ADN2860ACPZ250 | 制造商:Analog Devices 功能描述: |
| ADN2860ACPZ250-RL7 | 功能描述:IC POT DGTL 3CH 250K 24-LFCSP RoHS:是 類別:集成電路 (IC) >> 數據采集 - 數字電位器 系列:- 標準包裝:2,500 系列:XDCP™ 接片:256 電阻（歐姆）:100k 電路數:1 溫度系數:標準值 ±300 ppm/°C 存儲器類型:非易失 接口:I²C（設備位址） 電源電壓:2.7 V ~ 5.5 V 工作溫度:0°C ~ 70°C 安裝類型:表面貼裝 封裝/外殼:14-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:14-TSSOP 包裝:帶卷 (TR) |
發布緊急采購，3分鐘左右您將得到回復。