參數資料
型號: 73M1966B-DB
廠商: Maxim Integrated Products
文件頁數: 72/88頁
文件大?。?/td> 0K
描述: BOARD DEMO 73M1966B 20-TSSOP
產品培訓模塊: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝: 1
系列: *
73M1866B/73M1966B Data Sheet
DS_1x66B_001
74
Rev. 1.6
11.7 Voltage and Current Detection
The 73M1x66B is capable of detecting the following circumstances:
Under voltage on the line.
Over voltage on the line.
Over current.
These 73M1x66B built-in mechanisms provide protection to both the device itself and the external line
circuitry.
If enabled, Over Voltage and Over Current detection will cause the 73M1x66B to go on-hook without the
intervention of the host.
If configured in Line Powered Mode, the detection of an under-voltage condition causes the 73M1x66B to
switch automatically to Barrier Powered Operation (see Section 9.2.1). This is done without the
intervention of the host.
For each of the detection functions there are enable control bits and detection status bits. For each
function there is a master detection function enable bit that must be set in order for the functions to work.
11.8 Under Voltage Detection (UVD)
Under Voltage Detection is an important feature of 73M1x66B. It determines if the phone line is not
capable of supplying the current that the 73M1x66B requires from the line for proper operation. If this
function is enabled and if the line is not capable of providing this current, the UVD condition will be
asserted and can become a source of interrupt from the 73M1x66B to its connected host.
11.9 Over Voltage Detection (OVD)
If enabled, Over Voltage Detection is indicated if the device senses that the line voltage exceeds a
defined threshold. The device allows the selection of choice of either 60 Vpk or 70 Vpk (depending upon
the attenuation ratio, typically this is 100:1).
If enabled, the 73M1x66B will automatically go on-hook if over voltage is detected.
11.10 AC Signal Overload Detection
This is the same feature as used for the detection of billing tones (see Section 10.4). In this most generic
sense, this detector provides an indicator that the AC signal on the line exceeds a value of 3.5 Vpk.
11.11 Over Current Detection (OID)
When the line current exceeds the safe operating range of the 73M1x66B or the external transistors, the
device indicates this condition. If enabled, the 73M1x66B will automatically go on-hook if an over current
event is detected.
相關PDF資料
PDF描述
EEM18DTBT-S189 CONN EDGECARD 36POS R/A .156 SLD
EEM18DTAT-S189 CONN EDGECARD 36POS R/A .156 SLD
383LX822M100N062 CAP ALUM 8200UF 100V 20% SNAP
73M1866B-IFX KIT EVALUATION FOR 73M1866B
GMM08DSEN-S13 CONN EDGECARD 16POS .156 EXTEND
相關代理商/技術參數
參數描述
73M1966B-DB-C 功能描述:網絡開發工具 73M1966B Demo Brd w/GUI Cable RoHS:否 制造商:Rabbit Semiconductor 產品:Development Kits 類型:Ethernet to Wi-Fi Bridges 工具用于評估:RCM6600W 數據速率:20 Mbps, 40 Mbps 接口類型:802.11 b/g, Ethernet 工作電源電壓:3.3 V
73M1966B-EVM 功能描述:網絡開發工具 73M1966 Demo Brd & MotherBrd RoHS:否 制造商:Rabbit Semiconductor 產品:Development Kits 類型:Ethernet to Wi-Fi Bridges 工具用于評估:RCM6600W 數據速率:20 Mbps, 40 Mbps 接口類型:802.11 b/g, Ethernet 工作電源電壓:3.3 V
73M1966B-IM/F 制造商:Maxim Integrated Products 功能描述:
73M1966B-KEYCHN 功能描述:網絡開發工具 Keychain Eval Module RoHS:否 制造商:Rabbit Semiconductor 產品:Development Kits 類型:Ethernet to Wi-Fi Bridges 工具用于評估:RCM6600W 數據速率:20 Mbps, 40 Mbps 接口類型:802.11 b/g, Ethernet 工作電源電壓:3.3 V
73M1AR0015F 功能描述:RES 0.0015 OHM 1% 1W 1206 制造商:cts resistor products 系列:73M1A 包裝:帶卷(TR) 零件狀態:在售 電阻值:1.5 MOhms 容差:±1% 功率(W):1W 成分:金屬薄膜 特性:電流檢測 溫度系數:±100ppm/°C 工作溫度:-55°C ~ 155°C 封裝/外殼:1206(3216 公制) 供應商器件封裝:1206 大小/尺寸:0.126" 長 x 0.063" 寬(3.20mm x 1.60mm) 高度 - 安裝(最大值):0.035"(0.90mm) 端子數:2 故障率:- 標準包裝:4,000