參數資料
型號： 73M1966B-DB-C
廠商： Maxim Integrated Products
文件頁數： 39/88頁
文件大小： 0K
描述： BOARD DEMO 73M1966B CBL 20TSSOP
產品培訓模塊： Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
標準包裝： 1
系列： *
73M1866B/73M1966B Data Sheet
DS_1x66B_001
44
Rev. 1.6
7.6
Call Progress Monitor
For
the purpose of monitoring activities on the line, a Call Progress Monitor is provided in the 73M1x66B.
This audio output contains both transmit and receive data with configurable levels.
7.7
16 kHz Operation of Call Progress Monitor
After switching from 8 kHz sampling rate to 16 kHz sampling rate, the SLEEP bit must be enabled then
disabled if the Call Progress Monitor function is used. After cycling the SLEEP bit, the Line-Side Device
registers (Registers 0x12 to 0x18) must be reconfigured.
7.8
Device Reset
For a correct reset of the 73M1x66B, the
RST signal must be asserted for a minimum period of 1 ms.
PCLK must be active for a minimum of 8 clock cycles before the
RST signal can be de-asserted. The
PLL locks to the PCLK after 20 PCM frames as defined by the occurrence of the Frame Sync Signal (FS).
This gives a minimum period of 3.5 ms from the assertion of
RST until the PLL is locked and normal
operations may occur, including access to all device registers and the transmission and reception of PCM
data samples. If PCLK changes frequency, then the PLL will lose lock so a stable clock must be used
during this reset period. If a PCLK frequency change is required after the reset, the user should
implement the procedure described for PCODE (Register 0x23 bits 2 to 5).
Function
Mnemonic
Register
Location
Type
Description
CMRXG
0x10[1:0]
W
Receive Path Gain Setting
00
0 dB (for full swing, AOUT=1.08 Vpk) (Default)
01
-6 dB
10
-12 dB
11
MUTE
CMTXG
0x10[3:2]
W
Transmit Path Gain Setting
00
0 dB (for full swing, AOUT=1.08 Vpk) (Default)
01
-6 dB
10
-12 dB
11
MUTE
CMVSEL
0x10[4]
W
Call Progress Monitor Voltage Reference Select
Quiescent DC voltage select at AOUT.
0 = 1.5 Vdc. (Default)
1 = VCC/2 Vdc.
相關PDF資料
PDF描述
ECM30DCCH-S189 CONN EDGECARD 60POS R/A .156 SLD
GEM22DCAD-S189 CONN EDGECARD 44POS R/A .156 SLD
NR4010T6R8M INDUCTOR 6.8UH 20% SMD
M3BEK-2606R IDC CABLE - MSR26K/MC26M/MCE26K
382LX821M500B062VS CAP ALUM 820UF 500V 20% SNAP
相關代理商/技術參數
參數描述
73M1966B-EVM 功能描述:網絡開發工具 73M1966 Demo Brd & MotherBrd RoHS:否 制造商:Rabbit Semiconductor 產品:Development Kits 類型:Ethernet to Wi-Fi Bridges 工具用于評估:RCM6600W 數據速率:20 Mbps, 40 Mbps 接口類型:802.11 b/g, Ethernet 工作電源電壓:3.3 V
73M1966B-IM/F 制造商:Maxim Integrated Products 功能描述:
73M1966B-KEYCHN 功能描述:網絡開發工具 Keychain Eval Module RoHS:否 制造商:Rabbit Semiconductor 產品:Development Kits 類型:Ethernet to Wi-Fi Bridges 工具用于評估:RCM6600W 數據速率:20 Mbps, 40 Mbps 接口類型:802.11 b/g, Ethernet 工作電源電壓:3.3 V
73M1AR0015F 功能描述:RES 0.0015 OHM 1% 1W 1206 制造商:cts resistor products 系列:73M1A 包裝:帶卷（TR） 零件狀態:在售 電阻值:1.5 MOhms 容差:±1% 功率（W）:1W 成分:金屬薄膜 特性:電流檢測 溫度系數:±100ppm/°C 工作溫度:-55°C ~ 155°C 封裝/外殼:1206（3216 公制） 供應商器件封裝:1206 大小/尺寸:0.126" 長 x 0.063" 寬（3.20mm x 1.60mm） 高度 - 安裝（最大值）:0.035"（0.90mm） 端子數:2 故障率:- 標準包裝:4,000
73M1AR001F 功能描述:RES 0.001 OHM 1% 1W 1206 制造商:cts resistor products 系列:73M1A 包裝:帶卷（TR） 零件狀態:在售 電阻值:1 MOhms 容差:±1% 功率（W）:1W 成分:金屬薄膜 特性:電流檢測 溫度系數:±100ppm/°C 工作溫度:-55°C ~ 155°C 封裝/外殼:1206（3216 公制） 供應商器件封裝:1206 大小/尺寸:0.126" 長 x 0.063" 寬（3.20mm x 1.60mm） 高度 - 安裝（最大值）:0.035"（0.90mm） 端子數:2 故障率:- 標準包裝:4,000
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*