- 您現在的位置：買賣IC網 > PDF目錄245650 > W3E32M64S-266SBC (WHITE ELECTRONIC DESIGNS CORP) 32M X 64 DDR DRAM, 0.75 ns, PBGA208 PDF資料下載
參數資料
| 型號： | W3E32M64S-266SBC |
| 廠商： | WHITE ELECTRONIC DESIGNS CORP |
| 元件分類： | DRAM |
| 英文描述： | 32M X 64 DDR DRAM, 0.75 ns, PBGA208 |
| 封裝： | 13 X 22 MM, PLASTIC, BGA-208 |
| 文件頁數： | 18/18頁 |
| 文件大小： | 648K |
| 代理商： | W3E32M64S-266SBC |
9
White Electronic Designs Corporation (602) 437-1520 www.whiteedc.com
White Electronic Designs
W3E32M64S-XSBX
January 2008
Rev. 6
NOTES:
1.
CKE is HIGH for all commands shown except SELF REFRESH.
2.
A0-12 dene the op-code to be written to the selected Mode Register. BA0, BA1
select either the mode register (0, 0) or the extended mode register (1, 0).
3.
A0-12 provide row address, and BA0, BA1 provide bank address.
4.
A0-9 provide column address; A10 HIGH enables the auto precharge feature (non
persistent), while A10 LOW disables the auto precharge feature; BA0, BA1 provide
bank address.
5.
A10 LOW: BA0, BA1 determine the bank being precharged. A10 HIGH: All banks
precharged and BA0, BA1 are “Don’t Care.”
6.
This command is AUTO REFRESH if CKE is HIGH; SELF REFRESH if CKE is
LOW.
7.
Internal refresh counter controls row addressing; all inputs and I/Os are “Don’t
Care” except for CKE.
8.
Applies only to read bursts with auto precharge disabled; this command is
undened (and should not be used) for READ bursts with auto precharge enabled
and for WRITE bursts.
9.
DESELECT and NOP are functionally interchangeable.
10. Used to mask write data; provided coincident with the corresponding data.
Although not a JEDEC requirement, to provide for future
functionality features, CKE must be active (High) during
the AUTO REFRESH period. The AUTO REFRESH period
begins when the AUTO REFRESH command is registered
and ends tRFC later.
SELF REFRESH*
The SELF REFRESH command can be used to retain
data in the DDR SDRAM, even if the rest of the system
is powered down. When in the self refresh mode, the
DDR SDRAM retains data without external clocking. The
SELF REFRESH command is initiated like an AUTO
REFRESH command except CKE is disabled (LOW).
The DLL is automatically disabled upon entering SELF
REFRESH and is automatically enabled upon exiting SELF
REFRESH (200 clock cycles must then occur before a
READ command can be issued). Input signals except CKE
are “Don’t Care” during SELF REFRESH. VREF voltage is
also required for the full duration of SELF REFRESH.
The procedure for exiting self refresh requires a sequence
of commands. First, CK and CK# must be stable prior
to CKE going back HIGH. Once CKE is HIGH, the DDR
SDRAM must have NOP commands issued for tXSNR,
because time is required for the completion of any internal
refresh in progress.
A simple algorithm for meeting both refresh and DLL
requirements is to apply NOPs for tXSNR time, then a DLL
Reset and NOPs for 200 additional clock cycles before
applying any other command.
* Self refresh available in commercial and industrial temperatures only.
TRUTH TABLE – COMMANDS (NOTE 1)
NAME (FUNCTION)
CS#
RAS#
CAS#
WE#
ADDR
DESELECT (NOP) (9)
H
X
NO OPERATION (NOP) (9)
L
H
X
ACTIVE (Select bank and activate row) ( 3)
L
H
Bank/Row
READ (Select bank and column, and start READ burst) (4)
L
H
L
H
Bank/Col
WRITE (Select bank and column, and start WRITE burst) (4)
L
H
L
Bank/Col
BURST TERMINATE (8)
L
H
L
X
PRECHARGE (Deactivate row in bank or banks) ( 5)
L
H
L
Code
AUTO REFRESH or SELF REFRESH (Enterselfrefreshmode) (6, 7)
L
H
X
LOAD MODE REGISTER (2)
L
Op-Code
TRUTH TABLE – DM OPERATION
NAME (FUNCTION)
DM
DQs
WRITE ENABLE (10)
L
Valid
WRITE INHIBIT (10)
H
X
相關PDF資料 |
PDF描述 |
|---|---|
| W25X16-VSFI | 16M X 1 FLASH 2.7V PROM, PDSO16 |
| W25Q64CVSSAG | 64M X 1 SPI BUS SERIAL EEPROM, PDSO8 |
| WS32K32-100HC | 128K X 8 MULTI DEVICE SRAM MODULE, 100 ns, CHIP66 |
| WS128K32-25G4CE | 512K X 8 MULTI DEVICE SRAM MODULE, 25 ns, CQFP68 |
| WMS128K8L-35DEQE | 128K X 8 STANDARD SRAM, 35 ns, CDSO32 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| W3E32M64S-266SBI | 制造商:White Electronic Designs 功能描述:32M X 64 DDR, 2.5V, 266 MHZ, 208 PBGA, INDUSTRIAL TEMP. - Bulk 制造商:Microsemi Corporation 功能描述:SDRAM MEMORY |
| W3E32M64S-266SBM | 制造商:White Electronic Designs 功能描述:DRAM Module DDR SDRAM 256Mbyte 制造商:Microsemi Corporation 功能描述:32M X 64 DDR, 2.5V, 266 MHZ, 208 PBGA, MIL-TEMP. - Bulk |
| W3E32M64S-333BC | 制造商:Microsemi Corporation 功能描述:32M X 64 DDR, 2.5V, 333 MHZ, 219 PBGA, COMMERCIAL TEMP. - Bulk |
| W3E32M64S-333BI | 制造商:Microsemi Corporation 功能描述:32M X 64 DDR, 2.5V, 333 MHZ, 219 PBGA, INDUSTRIAL TEMP. - Bulk |
| W3E32M64S-333BM | 制造商:Microsemi Corporation 功能描述:32M X 64 DDR, 2.5V, 333 MHZ, 219 PBGA, MIL-TEMP. - Bulk |
發布緊急采購，3分鐘左右您將得到回復。