
Data Sheet U16277EJ1V0DS
41
μ
PD30181A, 30181AY
(3) Common
Parameter
Symbol
Conditions
MIN.
TYP.
MAX.
Unit
Fullspeed mode
350
mA
Fullspeed mode, program using cache
operating, DMA controller operating, clock
supplied to PCI unit
165
mA
Fullspeed mode, program using cache
operating, DMA controller operating
100
mA
Fullspeed mode, program not using cache
operating, all peripheral bus masters
stopped, all clocks of unused units stopped
80
mA
Standby mode, peripheral bus master
operating continuously
70
90
mA
Standby mode, all peripheral bus masters
stopped, all clocks of unused unit stopped
45
53
mA
Suspend mode
10
20
mA
I
DD25
Note 2
Hibernate mode, V
DD25
= 0 V
0
0
mA
32-bit bus
45
58
mA
Fullspeed mode
16-bit bus
40
50
mA
32-bit bus
45
58
mA
Standby mode,
peripheral bus master
operating continuously
16-bit bus
40
50
mA
Standby mode, all peripheral bus masters
stopped, all clocks of unused units stopped
2
4
mA
Suspend mode
2
4
mA
Hibernate mode, PWMU channel 0 operating
2
4
mA
I
DD33
Note 3
Hibernate mode, PWMU channel 0 stopped
25
50
μ
A
Power supply current
Note 1
I
DDAD
Note 4
A/D, D/A converters operating
3
9
mA
Input leakage current
Note
5
I
LI
V
DD33
= 3.6 V, V
I
= V
DD33
, 0 V
±
5
μ
A
Output leakage current
I
LO
V
DD33
= 3.6 V, V
I
= V
DD33
, 0 V
±
5
μ
A
Notes 1.
Value when AClock = 131.1 MHz, TClock = 65.55 MHz, Div2 mode.
2.
I
DD25
is the total current flowing to the VDD2 and VDDP pins.
3.
I
DD33
is the total current flowing to the VDD3, VDDU, VDDTP, and VDDO pins.
4.
I
DDAD
is the current flowing to the VDDAD pin when Vref is supplied to the A/D and D/A converters.
5.
Excluding the I.C. pin.
Remarks 1.
In Suspend mode, the internal LCD controller does not operate because the memory controller
(MCU) clock and LCD controller (LCU) clock are stopped.
2.
Each current value is the average value that flows under the specified conditions. Design the power
supply so that the current under the MAX. condition can be supplied stably (so that voltage drop or
ripple do not occur in the whole system).
3.
The peripheral bus master indicates the following peripheral units.
LCU, DCU, IOPCIU, USBHU, USBFU, AC97U