參數資料
型號： TDA9875AH
廠商： NXP SEMICONDUCTORS
元件分類： 消費家電
英文描述： Digital TV Sound Processor DTVSP
中文描述： SPECIALTY CONSUMER CIRCUIT, PQFP64
封裝： PLASTIC, QFP
文件頁數： 19/96頁
文件大?。?/td> 296K
代理商： TDA9875AH
1999 Dec 20
19
Philips Semiconductors
Product specification
Digital TV Sound Processor (DTVSP)
TDA9875A
6.3.5
L
INE OUTPUT
The line output can provide an unprocessed copy of the
audio signal in the loudspeaker channels. This can be
either an external signal that comes from the dual audio
ADC, or a signal from an internal digital audio source that
comes from the dual audio DAC. The line output employs
amplifiers with two gain settings. The 3 dB position is
needed to compensate for the attenuation at the SCART
inputs, while the 0 dB position is needed, for example, for
non-attenuated external or internal digital signals
(see Section 6.3.4).
6.3.6
L
OUDSPEAKER
(M
AIN
)
AND HEADPHONE
(A
UXILIARY
)
OUTPUTS
Signals from any audio source can be applied to the
loudspeakerandtotheheadphoneoutputchannelsviathe
digital crossbar switch and the DSP.
6.3.7
D
UAL AUDIO
DAC
The TDA9875A contains three dual audio DACs, one for
theconnectionfromtheDSPto theanalogcrossbarswitch
section and two for the loudspeaker and headphone
outputs. Each of the three dual low-noise high-dynamic
range DACs consists of two 15-bit DACs with current
outputs, followed by a buffer operational amplifier.
The audio DACs operate with four-fold oversampling and
noise shaping.
6.3.8
D
UAL AUDIO
ADC
There is one dual audio ADC in the TDA9875A for the
connection of the analog crossbar switch section to the
DSP. The dual audio ADC consists of two bitstream
third-order sigma-delta audio ADCs and a high-order
decimation filter.
6.3.9
S
TANDBY MODE
The standby mode, selected by setting bit STDBY to
logic 1 (see Section 10.3.2) disables most functions and
reduces power dissipation. The analog crossbar switch
and the SCART section remain operational and can be
controlled by the I
2
C-bus to support copying of analog
signals from SCART-to-SCART.
Unused internal registers may lose their information in the
standby mode. Therefore, the device needs to be
initialized on returning to the normal operating mode. This
can be accomplished in the same way as after a Power-on
reset.
6.3.10
S
UPPLY GROUND
The different supply grounds V
SS
are internally connected
via the substrate. It is recommended to connect all ground
pins by means of a copper plane close to the pins.
相關PDF資料
PDF描述
TDA9875 Digital TV Sound Processor DTVSP
TDA9965 12-bit, 5.0 V, 30 Msps analog-to-digital interface for CCD cameras
TDZ10 Low Current Operation at 250 ，Low Reverse Leakage,Low Noise Zener Diode
TDZ11 Low Current Operation at 250 ，Low Reverse Leakage,Low Noise Zener Diode
TDZ12 Low Current Operation at 250 ，Low Reverse Leakage,Low Noise Zener Diode
相關代理商/技術參數
參數描述
TDA9875AH/V2,557 功能描述:IC SOUND PROC DGTL TV 64QFP RoHS:是 類別:集成電路 (IC) >> 線性 - 音頻處理 系列:- 其它有關文件:STA321 View All Specifications 標準包裝:1 系列:Sound Terminal™ 類型:音頻處理器 應用:數字音頻 安裝類型:表面貼裝 封裝/外殼:64-LQFP 裸露焊盤 供應商設備封裝:64-LQFP EP（10x10） 包裝:Digi-Reel® 其它名稱:497-11050-6
TDA9880 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Alignment-free multistandard vision and FM sound IF-PLL demodulator
TDA9880T 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Alignment-free multistandard vision and FM sound IF-PLL demodulator
TDA9881 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Alignment-free vision and FM sound IF PLL demodulator for negative modulated TV standards
TDA9881HN 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:Alignment-free vision and FM sound IF PLL demodulator for negative modulated TV standards
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*