參數資料
型號: SNJ54BCT8374AJT
廠商: TEXAS INSTRUMENTS INC
元件分類: 總線收發器
英文描述: BCT/FBT SERIES, 8-BIT BOUNDARY SCAN DRIVER, TRUE OUTPUT, CDIP24
封裝: 0.300 INCH, CERAMIC, DIP-24
文件頁數: 21/26頁
文件大?。?/td> 434K
代理商: SNJ54BCT8374AJT
SN54BCT8374A, SN74BCT8374A
SCAN TEST DEVICES
WITH OCTAL D-TYPE EDGE-TRIGGERED FLIP-FLOPS
SCBS045E JUNE 1990 REVISED JULY 1996
4
POST OFFICE BOX 655303
DALLAS, TEXAS 75265
POST OFFICE BOX 1443
HOUSTON, TEXAS 772511443
Terminal Functions
TERMINAL
NAME
DESCRIPTION
CLK
Normal-function clock input. See function table for normal-mode logic. An internal pullup forces CLK to a high level if left
unconnected.
1D8D
Normal-function data inputs. See function table for normal-mode logic. Internal pullups force these inputs to a high level if
left unconnected.
GND
Ground
OE
Normal-function output-enable input. See function table for normal-mode logic. An internal pullup forces OE to a high level
if left unconnected.
1Q8Q
Normal-function data outputs. See function table for normal-mode logic.
TCK
Test clock. One of four terminals required by IEEE Standard 1149.1-1990. Test operations of the device are synchronous to
TCK. Data is captured on the rising edge of TCK and outputs change on the falling edge of TCK. An internal pullup forces
TCK to a high level if left unconnected.
TDI
Test data input. One of four terminals required by IEEE Standard 1149.1-1990. TDI is the serial input for shifting data through
the instruction register or selected data register. An internal pullup forces TDI to a high level if left unconnected.
TDO
Test data output. One of four terminals required by IEEE Standard 1149.1-1990. TDO is the serial output for shifting data
through the instruction register or selected data register. An internal pullup forces TDO to a high level when it is not active
and is not driven from an external source.
TMS
Test mode select. One of four terminals required by IEEE Standard 1149.1-1990. TMS directs the device through its TAP
controller states. An internal pullup forces TMS to a high level if left unconnected. TMS also provides the optional test reset
signal of IEEE Standard 1149.1-1990. This is implemented by recognizing a third logic level, double high (VIHH), at TMS.
VCC
Supply voltage
相關PDF資料
PDF描述
SNJ54F02FK F/FAST SERIES, QUAD 2-INPUT NOR GATE, CQCC20
SNJ54F153FKR F/FAST SERIES, DUAL 4 LINE TO 1 LINE MULTIPLEXER, TRUE OUTPUT, CQCC20
SN74F153DE4 F/FAST SERIES, DUAL 4 LINE TO 1 LINE MULTIPLEXER, TRUE OUTPUT, PDSO16
SNJ54F244J F/FAST SERIES, DUAL 4-BIT DRIVER, TRUE OUTPUT, CDIP20
SNJ54F245FKR F/FAST SERIES, 8-BIT TRANSCEIVER, TRUE OUTPUT, CQCC20
相關代理商/技術參數
參數描述
SNJ54CBT16244WD 制造商:Texas Instruments 功能描述:Bus Switch 4-Element CMOS 16-IN 48-Pin CFPAK Tube
SNJ54CBT3383JT 制造商:Texas Instruments 功能描述:Bus Exchange Switch 1-Element 5-CH 24-Pin CDIP Tube
SNJ54CBTD3384JT 制造商:Texas Instruments 功能描述:Bus Switch 2-Element CMOS 10-IN 24-Pin CDIP Tube 制造商:Texas Instruments 功能描述:5962-9752701QLA - Rail/Tube
SNJ54CBTD3384W 制造商:Texas Instruments 功能描述:5962-9752701QKA
SNJ54F00FK 制造商:Texas Instruments 功能描述: