
12
AMD Geode SC1100 Processor Data Book
AMD Geode SC1100 Processor
Revision 2.0
1.2
Features
General Features
■ 32-bit x86 processor, up to 266 MHz, with MMX instruc-
tion set support
■ Memory controller with 64-bit SDRAM interface
■ PC/AT functionality
■ PCI bus controller
■ IDE interface, two channels
■ USB, three ports, OHCI (OpenHost Controller Interface)
version 1.0 compliant
■ Audio, AC97/AMC97 version 2.0 compliant
■ AMD’s Virtual System Architecture technology (VSA)
support
■ Power management, ACPI (Advanced Configuration
Power Interface) version 1.0 compliant
■ Package:
— 388-Terminal TEPBGA (Thermally Enhanced Plastic
Ball Grid Array)
GX1 Processor Module
■ CPU Core:
— 32-bit x86 processor, up to 266 MHz, with MMX
instruction set support
— 16 KB unified L1 cache
— Integrated FPU (Floating Point Unit)
— Re-entrant SMM (System Management Mode)
enhanced for VSA
■ Memory Controller:
— 64-bit SDRAM interface
— 78 to 89 MHz frequency range
— Direct interface with CPU/cache
— Supports clock suspend and power-down/
self-refresh
— Up to eight SDRAM devices or one DIMM/SODIMM
Core Logic Module
■ Audio Codec Interface:
— AC97/AMC97 (Rev. 2.0) codec interface
— Six DMA channels
■ PC/AT Functionality:
— PIC (Programmable Interrupt Controller), 8259A-
equivalent
— PIT (Programmable Interval Timer), 8254-equivalent
— DMAC (DMA Controller), 8237-equivalent
■ Power Management:
— ACPI 1.0 compliant
— Sx state control of three power planes
— Cx/Sx state control of clocks and PLLs
— Thermal event input
— Wakeup event support:
– Three general-purpose events
– UART RI# signal
– IR (Infrared) event
■ GPIOs (General Purpose I/Os):
— Six (6) dedicated GPIO signals
— 24 multiplexed GPIO signals
■ LPC (Low Pin Count) Bus Interface:
— Specification version 1.0 compatible
■ PCI Bus Interface:
— PCI v2.1 compliant with wakeup capability
— 32-bit data path, up to 33 MHz
— Glueless interface for an external PCI device
— Supports four PCI bus master devices
— Supports four PCI interrupts
— Rotating priority
— 3.3V signal support only
■ Sub-ISA Bus Interface:
— Supports up to four chip selects for external memory
devices
– Up to 16 MB addressing
– Supports a chip select for ROM or Flash EPROM
boot device, up to 16 MB
– A chip select for one of:
–
M-Systems DiskOnChip DOC2000 Flash file
system
–
NAND EEPROM
— Supports up to two chip selects for external I/O
devices
– 8-bit (optional 16-bit) data bus width
– Cycle multiplexed with PCI signals
– Is not the subtractive decode agent
■ IDE Interface:
— Two IDE channels for up to four external IDE devices
— Supports ATA-33 synchronous DMA mode transfers,
up to 33 MB/s
■ USB (Universal Serial Bus):
— USB OpenHCI 1.0 compliant
— Three ports