參數資料
型號： S1C63567F0A0100
元件分類： 微控制器/微處理器
英文描述： MICROCONTROLLER, PQFP144
封裝： PLASTIC, QFP-144
文件頁數： 119/172頁
文件大小： 1349K
代理商： S1C63567F0A0100
40
EPSON
S1C63567 TECHNICAL MANUAL
CHAPTER 4: PERIPHERAL CIRCUITS AND OPERATION (Output Ports)
CRMO: R11 output selection register (FF13HD1)
Selects the R11 terminal function.
When "1" is written: XRMUTE output
When "0" is written: General-purpose DC output
Reading: Valid
When using the R11 terminal for the XRMUTE output, write "1" to this register. Furthermore, fix the R11
register at "1" and the R11HIZ register at "0". Refer to Section 4.14, "Telephone Function", for controlling
the XRMUTE output.
When using the R11 output port for a general-purpose output, fix this register at "0".
At initial reset, this register is set to "0".
CHDO: R12 output selection register (FF13HD2)
Selects the R12 terminal function.
When "1" is written: HDO output
When "0" is written: General-purpose DC output
Reading: Valid
When using the R12 terminal for the HDO output, write "1" to this register. Furthermore, fix the R12
register at "1" and the R12HIZ register at "0". Refer to Section 4.14, "Telephone Function", for controlling
the HDO output.
When using the R12 output port for a general-purpose output, fix this register at "0".
At initial reset, this register is set to "0".
CHFO: R13 output selection register (FF13HD3)
Selects the R13 terminal function.
When "1" is written: HFO output
When "0" is written: General-purpose DC output
Reading: Valid
When using the R13 terminal for the HFO output, write "1" to this register. Furthermore, fix the R13
register at "1" and the R13HIZ register at "0". Refer to Section 4.14, "Telephone Function", for controlling
the HFO output.
When using the R13 output port for a general-purpose output, fix this register at "0".
At initial reset, this register is set to "0".
4.5.6 Programming notes
(1) When using an output port (R00–R03, R10–R13) for special output, fix the corresponding data register
(R00–R03, R10–R13) at "1" and the high impedance control register (R00HIZ–R03HIZ, R10HIZ–
R13HIZ) at "0" (data output).
Be aware that the output terminal is fixed at a low (VSS) level the same as the DC output if "0" is
written to the data registers when the special output has been selected.
Be aware that the output terminal shifts into high impedance status when "1" is written to the high
impedance control register.
(2) A hazard may occur when the TOUT, FOUT, BZ or XBZ signal is turned ON and OFF.
(3) When fOSC3 is selected for the FOUT signal frequency, it is necessary to control the OSC3 oscillation
circuit before output.
Refer to Section 4.3, "Oscillation Circuit", for the control and notes.
相關PDF資料
PDF描述
S1C63653F 4-BIT, FLASH, 4 MHz, MICROCONTROLLER, CQFP100
S1C6F567D0A0100 MICROCONTROLLER, UUC141
S1C6N3B0D0A0100 MICROCONTROLLER, UUC54
S1C6P366D0A0100 4-BIT, FLASH, 4.1 MHz, MICROCONTROLLER, UUC102
S1C6P466D0A0A00 MICROCONTROLLER, UUC140
相關代理商/技術參數
參數描述
S1C63616 制造商:EPSON 制造商全稱:EPSON 功能描述:4-bit Single Chip Microcomputer
S1C63632 制造商:EPSON 制造商全稱:EPSON 功能描述:4-bit Single Chip Microcomputer
S1C63653 制造商:EPSON 制造商全稱:EPSON 功能描述:CMOS 4-bit Single Chip Microcontroller
S1C63656 制造商:EPSON 制造商全稱:EPSON 功能描述:4-bit Single Chip Microcomputer
S1C63657 制造商:EPSON 制造商全稱:EPSON 功能描述:CMOS 4-bit Single Chip Microcontroller
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*