參數資料
型號: PNX8526EH
廠商: NXP SEMICONDUCTORS
元件分類: 消費家電
英文描述: Programmable source decoder with integrated peripherals
中文描述: SPECIALTY CONSUMER CIRCUIT, PBGA456
封裝: 35 X 35 MM, 1.8 MM HEIGHT, PLASTIC, MS-034, SOT610-1, HBGA-456
文件頁數: 55/59頁
文件大?。?/td> 3319K
代理商: PNX8526EH
Philips Semiconductors
PNX8526
Programmable Source Decoder with Integrated Peripherals
Preliminary data
Rev. 01 – 6 October 2003
55 of 59
9397 750 11715
Koninklijke Philips Electronics N.V. 2003. All rights reserved.
17. Soldering
17.1 Introduction to soldering surface mount packages
This text gives a very brief insight to a complex technology. A more in-depth account
of soldering ICs can be found in our
Data Handbook IC26; Integrated Circuit
Packages
(document order number 9398 652 90011).
There is no soldering method that is ideal for all IC packages. Wave soldering can still
be used for certain surface mount ICs, but it is not suitable for fine pitch SMDs. In
these situations reflow soldering is recommended. In these situations reflow soldering
is recommended.
17.2 Reflow soldering
Reflow soldering requires solder paste (a suspension of fine solder particles, flux and
binding agent) to be applied to the printed-circuit board by screen printing, stencilling
or pressure-syringe dispensing before package placement. Driven by legislation and
environmental forces the worldwide use of lead-free solder pastes is increasing.
Several methods exist for reflowing; for example, convection or convection/infrared
heating in a conveyor type oven. Throughput times (preheating, soldering and
cooling) vary between 100 and 200 seconds depending on heating method.
Typical reflow peak temperatures range from 215 to 270
°
C depending on solder
paste material. The top-surface temperature of the packages should preferably be
kept:
below 220
°
C (SnPb process) or below 245
°
C (Pb-free process)
for all BGA and SSOP-T packages
for packages with a thickness
2.5 mm
for packages with a thickness < 2.5 mm and a volume
350 mm
3
so called
thick/large packages.
below 235
°
C (SnPb process) or below 260
°
C (Pb-free process) for packages with
a thickness < 2.5 mm and a volume < 350 mm
3
so called small/thin packages.
Moisture sensitivity precautions, as indicated on packing, must be respected at all
times.
17.3 Wave soldering
Conventional single wave soldering is not recommended for surface mount devices
(SMDs) or printed-circuit boards with a high component density, as solder bridging
and non-wetting can present major problems.
To overcome these problems the double-wave soldering method was specifically
developed.
If wave soldering is used the following conditions must be observed for optimal
results:
Use a double-wave soldering method comprising a turbulent wave with high
upward pressure followed by a smooth laminar wave.
相關PDF資料
PDF描述
PPC5001T NPN microwave power transistor
PRLL4001 Rectifiers
PRLL4002 Rectifiers
PRLL5817 Hall-Effect Switches for Automotive, Industrial and Consumer Applications; Package: PG-SSO-3; Target Application: Automotive; Type: Bipolar Switch; Chopped Hall Technology: no; Interface: open collector; Direction Detection: no
PRLL5818 Hall-Effect Switches for Automotive, Industrial and Consumer Applications; Package: PG-SSO-3; Target Application: Automotive; Type: latch; Chopped Hall Technology: yes; Interface: open collector; Direction Detection: no
相關代理商/技術參數
參數描述
PNX8932E/M101S5 LP 制造商:Entropic 功能描述:IC
PNX8935E/M101S4,557 制造商:NXP Semiconductors 功能描述:
PNX8935E/M101S5,55 制造商:Entropic Communications 功能描述:NR5288054557-RH1 制造商:NXP Semiconductors 功能描述:PNX8935E/BGA432/TRAYDPM//M101S
PNX8935E1/M101S1SP 制造商:Trident Microsystems, Ltd. 功能描述:TTMPNX8935E1/M101S1SP CONNECTED MEDIA PR
PNX8950EH/M2/S1 功能描述:視頻 IC 開發工具 IPTV STB810 SOC RoHS:否 制造商:Texas Instruments 產品:Evaluation Boards 類型:YPbPr to RGBHV Converters 工具用于評估:LMH1251 工作電源電壓:5 V