參數資料
型號: PCL-818L
廠商: Electronic Theatre Controls, Inc.
英文描述: High-performance DAS card with programmable gain
中文描述: 高性能DAS的可編程增益卡
文件頁數: 38/74頁
文件大小: 546K
代理商: PCL-818L
34
PCL-818L User's Manual
Remarks
If you trigger the A/D conversion with the on-board pacer or an
external pulse, your software should check the INT bit, not the EOC
bit, before it reads the conversion data.
EOC can equal 0 in two different situations: the conversion is com-
pleted
or
no conversion has been started. Your software should
therefore wait for the signal INT = 1 before it reads the conversion
data. It should then clear the INT bit by writing any value to the A/D
status register BASE+8.
Control register BASE+9
Read/write register BASE+9 provides information on the PCL-818L's
operating modes.
BASE+9 Control
Bit
D7
Value
INTE
D6
I2
D5
I1
D4
I0
D3
X
D2
DMAE
D1
ST1
D0
ST0
INTE
Disable/enable PCL-818L generated interrupts
0
Disables interrupt generation. No interrupt signal
can be sent to the PC bus.
1
Enables interrupt generation. If DMAE
= 0 the PCL-
818L will generate an interrupt when it completes an
A/D conversion. Use this setting for interrupt driven
data transfer.
If DMAE = 1 the PCL-818L will generate an
interrupt when it receives a T/C (terminal count)
signal from the PC's DMA controller, indicating that
a DMA transfer has completed. Use this setting for
DMA data transfer. The DMA transfer is stopped by
the interrupt caused by the T/C signal. See DMAE
below.
相關PDF資料
PDF描述
PCL01-6 LOW CAPACITANCE TVS ARRAY
PCL100 REINIGUNG TINTE FETT OEL 100ML
PCL19012-SERIES Optoelectronic
PCL19010-SERIES Optoelectronic
PCL19011-SERIES Optoelectronic
相關代理商/技術參數
參數描述
PCL-818LS 制造商:ADVANTECH 制造商全稱:Advantech Co., Ltd. 功能描述:100 kS/s, 12-bit, 16-ch ISA Multifunction Card
PCL-818LS-CE 制造商:Advantech Co Ltd 功能描述:PCL-818L With PCLD-8115And Cable
PCL81A03 制造商:Amphenol PCD 功能描述:METAL P-CLAMP - Bulk
PCL82A06 制造商:Amphenol PCD 功能描述:METAL P-CLAMP - Bulk
PCL-832-A 制造商:Advantech Co Ltd 功能描述:3-Axis Servomotor Control ISA-bus Card