
Celeron
Processor Mobile Module MMC-2
at 700 MHz, 650 MHz, 600 MHz, 550 MHz, 500 MHz, and 450 MHz
30
Datasheet
243357-005
5.2
System Power Requirements
Table 21 provides the DC power supply design criteria.
NOTES:
1. V_DC is set for 12.0V in order to determine typical V_DC current.
2. V_DC is set for 7.5V in order to determine maximum V_DC current.
3. A 20-
S duration.
4. This is V_DC dependent. See
Figure 7 for data of IDC-RMS vs. V_DC.
5. These values are system dependent.
6. Specifications labeled N/A are not applicable.
5.3
Processor Core Voltage Regulation
The DC voltage regulator (DC/DC converter) is designed to support the core voltage and I/O ring
voltage for current and future Intel mobile processors. The DC voltage regulator provides the
appropriate mobile Celeron processor core voltage, the GTL+ bus termination voltage, the
processor sideband signal pull-up voltage, and the clock driver buffer voltage. Of these voltages,
only the processor sideband pullup voltage (V_CPUPU) and the clock driver buffer voltage
(V_CLK) are delivered to the system electronics.
The mobile module supports input DC voltage range of 7.5V ~ 21.0V from the system battery or
power supply for mobile applications.
5.3.1
Voltage Regulator Efficiency
There are three voltage regulators on the mobile module. These voltage regulators generate the
core voltage used by the CPU and the voltage for the CPU I/O ring voltage. The core voltage
regulator provides the required current from the V_DC supply and its relative efficiencies are
shown in
Table 22 and
Figure 5. The V_CLK and Vtt voltage regulators tap the V_3 plane.
Table 21. System Power Requirements
Symbol
Parameter
Min
Nom
Max
Unit
Notes
VDC
DC Input Voltage
7.5
12.0
21.0
V
IDC
DC Input Current
0.1
2.6
5.0
A
Notes 1,2
IDC_RMS
RMS Ripple Current
N/A
7.5
A
Notes 4,6
IDC_Surge
Maximum Surge Current for VDC
N/A
20.0
A
Notes 3,6
V5
Power Managed 5.0-V Supply
4.75
5.0
5.25
V
I5
20.0
50.0
100.0
mA
I5_Surge
Maximum Surge Current for V5
N/A
1.5
A
Notes 3,6
V3
Power Managed 3.3-V Supply
3.135
3.3
3.465
V
I3
Power Managed 3.3-V Current
0.8
1.2
3.0
A
I3_Surge
Maximum Surge Current for V3
N/A
4.0
A
Notes 3,6
VCPUPU
Processor I/O Ring Voltage
1.375
1.5
1.625
V
ICPUPU
Processor I/O Ring Current
0.0
10.0
20.0
mA
VCLK
Processor Clock Rail Voltage
2.375
2.5
2.625
V
ICLK
Processor Clock Rail Current
24.0
35.0
80.0
mA
Note 5