
4-4
MCF5307 User’s Manual
SRAM Initialization
The mapping of a given access into the RAM uses the following algorithm to determine if
the access hits in the memory:
if (RAMBAR[0] = 1)
if (requested address[31:15] = RAMBAR[31:15])
if (requested address[14:12] = 0)
if (ASn of the requested type = 0)
Access is mapped to the RAM module
if (access = read)
Read the RAM and return the data
if (access = write)
if (RAMBAR[8] = 0)
Write the data into the RAM
else Signal a write-protect access error
ASn refers to the ve address space mask bits: C/I, SC, SD, UC, and UD.
4.5 SRAM Initialization
After a hardware reset, the contents of the SRAM module are undened. The valid bit,
RAMBAR[V], is cleared, disabling the SRAM module. If the SRAM requires initialization
with instructions or data, the following steps should be performed:
1. Read the source data and write it to the SRAM. Various instructions support this
function, including memory-to-memory move instructions and the move multiple
instruction (MOVEM). MOVEM is optimized to generate line-sized burst fetches on
line-aligned addresses, so it generally provides maximum performance.
2. After the data is loaded into the SRAM, it may be appropriate to revise the
RAMBAR attribute bits, including the write-protect and address space mask elds.
Remember that the SRAM cannot be accessed by the on-chip DMAs. The on-chip system
conguration allows concurrent core and DMA execution where the core can execute code
5–1
C/I,
SC,
SD,
UC,
UD
Address space masks (ASn). These elds allow certain types of accesses to be masked, or
inhibited from accessing the SRAM module. These bits are useful for power management as
The address space mask bits are follows:
C/I = CPU space/interrupt acknowledge cycle mask. Note that C/I must be set if BA = 0.
SC = Supervisor code address space mask
SD = Supervisor data address space mask
UC = User code address space mask
UD = User data address space mask
For each ASn bit:
0 An access to the SRAM module can occur for this address space
1 Disable this address space from the SRAM module. If a reference using this address space is
made, it is inhibited from accessing the SRAM module and is processed like any other
non-SRAM reference.
0
V
Valid. Enables/disables the SRAM module. V is cleared at reset.
0 RAMBAR contents are not valid.
1 RAMBAR contents are valid.
Table 4-1. RAMBAR Field Description (Continued)
Bits
Name
Description
F
re
e
sc
a
le
S
e
m
ic
o
n
d
u
c
to
r,
I
Freescale Semiconductor, Inc.
For More Information On This Product,
Go to: www.freescale.com
n
c
..
.