參數資料
型號： M37281EKSP
元件分類： 微控制器/微處理器
英文描述： 8-BIT, OTPROM, 8.1 MHz, MICROCONTROLLER, PDIP52
封裝： 0.600 INCH, 1.78 MM PITCH, PLASTIC, SDIP-52
文件頁數： 145/172頁
文件大小： 1319K
代理商： M37281EKSP
M37281MAH–XXXSP,M37281MFH–XXXSP,M37281MKH–XXXSP, M37281EKSP
Rev.1.01
2003.07.16
page 74 of 170
8.11.2 Display Position
The display start positions of characters are specified by a block.
There are 16 blocks, blocks 1 to 16. Up to 32 characters can be
displayed in each block (refer to “8.11.6 Memory for OSD”).
The display position of each block can be set in both horizontal and
vertical directions by software.
The display start position in the horizontal direction can be selected
for all blocks in common from 256-step display positions in units of 4
TOSC (TOSC = OSD oscillation cycle).
The display start position in the vertical direction for each block can
be selected from 1024-step display positions in units of 1 TH ( TH =
HSYNC cycle).
Blocks are displayed in conformance with the following rules:
When the display start position is overlapped with another block
(Figure 8.11.8 (b)), a lower block number (1 to 16) is displayed on
the front.
When another block display position appears while one block is
displayed (Figure 8.11.8 (c)), the block with a larger set value as
the vertical display start position is displayed. However, do not dis-
play block with the dot size of 2TC 2H or 3TC 3H during display
period () of another block.
Fig. 8.11.8 Display Position
In the case of OSD mode block: 20 dots in vertical from the vertical
display start position.
In the case of CC or CDOSD mode block: 26 dots in vertical from
the vertical display start position.
HP
VP12, VP22
Block 1
Block 2
(a) Example when each block is separated
VP13, VP23
Block 3
HP
VP11, VP21 = VP12, VP22
Block 1
(b) Example when block 2 overlaps with block 1
(Block 2 is not displayed)
HP
VP11, VP21
VP12, VP22
(c) Example when block 2 overlaps in process of block 1
Block 1
Block 2
Note: VP1i or VP2i (i : 1 to 16) indicates the vertical display start position of display block i.
VP11, VP21
相關PDF資料
PDF描述
M37281MFH-XXXSP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP52
M37281MAH-XXXSP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP52
M37281MKH-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP52
M37281MAH-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP52
M37281MFH-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP52
相關代理商/技術參數
參數描述
M37281ERSS 功能描述:EMULATION MCU/8BIT CMOS EMULATIO RoHS:否 類別:編程器，開發系統 >> 過時/停產零件編號 系列:- 標準包裝:1 系列:- 傳感器類型:CMOS 成像，彩色（RGB） 傳感范圍:WVGA 接口:I²C 靈敏度:60 fps 電源電壓:5.7 V ~ 6.3 V 嵌入式:否 已供物品:成像器板 已用 IC / 零件:KAC-00401 相關產品:4H2099-ND - SENSOR IMAGE WVGA COLOR 48-PQFP4H2094-ND - SENSOR IMAGE WVGA MONO 48-PQFP
M37281MAH-XXXSP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER
M37281MFH-XXXSP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER
M37281MKH-XXXSP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER
M372899234 制造商:ITW Switches 功能描述:IN-RUSH
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*