參數資料
型號： M30201F2-FP
元件分類： 微控制器/微處理器
英文描述： 16-BIT, FLASH, 10 MHz, MICROCONTROLLER, PQFP56
封裝： PLASTIC, QFP-56
文件頁數： 111/158頁
文件大?。?/td> 1633K
代理商： M30201F2-FP
56
Under
development
Mitsubishi microcomputers
M30201 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Timer A
Item
Specification
Count source
f1, f8, f32, fC32
Count operation
The timer counts down
When the count reaches 000016, the timer stops counting after reloading a new count
If a trigger occurs when counting, the timer reloads a new count and restarts counting
Divide ratio
1/n
n : Set value
Count start condition
An external trigger is input
The timer overflows
The one-shot start flag is set (= 1)
Count stop condition
A new count is reloaded after the count has reached 000016
The count start flag is reset (= 0)
Interrupt request generation timing
The count reaches 000016
TA0IN pin function
Programmable I/O port or trigger input
TA0OUT pin function
Programmable I/O port or pulse output
Read from timer
When timer A0 register is read, it indicates an indeterminate value
Write to timer
When counting stopped
When a value is written to timer A0 register, it is written to both reload
register and counter
When counting in progress
When a value is written to timer A0 register, it is written to only reload register
(Transferred to counter at next reload time)
Table 1.16. Timer specifications in one-shot timer mode
Figure 1.44. Timer A0 mode register in one-shot timer mode
(3) One-shot timer mode
In this mode, the timer operates only once. (See Table 1.16.) When a trigger occurs, the timer starts up
and continues operating for a given period. Figure 1.44 shows the timer A0 mode register in one-shot
timer mode.
Bit name
Function
Bit symbol
Operation mode select bit
1 0 : One-shot timer mode
b1 b0
TMOD1
TMOD0
MR0
Pulse output function
select bit
0 : Pulse is not output
(TA0OUT pin is a normal port pin)
1 : Pulse is output (Note 1)
(TA0OUT pin is a pulse output pin)
MR2
MR1
MR3
0 (Must always be “0” in one-shot timer mode)
0 0 : f1
0 1 : f8
1 0 : f32
1 1 : fC32
b7 b6
TCK1
TCK0
Count source select bit
10
0
0 : One-shot start flag is valid
1 : Selected by event/trigger select
register
Trigger select bit
External trigger select
bit (Note 2)
0 : Falling edge of TA0IN pin's input signal (Note 3)
1 : Rising edge of TA0IN pin's input signal (Note 3)
W
R
Note 1: Set the corresponding port direction register to “1” (output mode).
Note 2: Valid only when the TA0IN pin is selected by the event/trigger select bit
(addresses 038316). If timer overflow is selected, this bit can be “1” or “0”.
Note 3: Set the corresponding port direction register to “0” (input mode).
Timer A0 mode register
Symbol
Address
When reset
TA0MR
039616
0016
b7
b6
b5 b4
b3
b2
b1
b0
相關PDF資料
PDF描述
M30201M6T-XXXFP 16-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP56
M30201M4T-XXXFP 16-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP56
M30201M4-XXXFP 16-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP56
M30201M6T-XXXFP 16-BIT, MROM, 10 MHz, MICROCONTROLLER, PQFP56
M30201M4-XXXSP 16-BIT, MROM, 10 MHz, MICROCONTROLLER, PDIP52
相關代理商/技術參數
參數描述
M30201F2T-XXXFP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M30201F2T-XXXSP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M30201F2-XXXFP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M30201F2-XXXSP 制造商:MITSUBISHI 制造商全稱:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
M30201F4T-XXXFP 制造商:RENESAS 制造商全稱:Renesas Technology Corp 功能描述:16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*