參數資料
型號： IT80C52EXXX-30SHXXX:R
廠商： TEMIC SEMICONDUCTORS
元件分類： 微控制器/微處理器
英文描述： 8-BIT, MROM, 30 MHz, MICROCONTROLLER, PQFP44
文件頁數： 2/60頁
文件大小： 5137K
10
8266D-MCU Wireless-06/12
ATmega128RFA1
The fast-access Register File contains 32 x 8-bit general purpose working registers with
a single clock cycle access time. This allows single-cycle Arithmetic Logic Unit (ALU)
operation. In a typical ALU operation, two operands are output from the Register File,
the operation is executed, and the result is stored back in the Register File – in one
clock cycle.
Six of the 32 registers can be used as three 16-bit indirect address register pointers for
Data Space addressing – enabling efficient address calculations. One of these address
pointers can also be used as an address pointer for look up tables in Flash program
memory. These added function registers are the 16-bit X-, Y-, and Z-register, described
later in this section.
The ALU supports arithmetic and logic operations between registers or between a
constant and a register. Single register operations can also be executed in the ALU.
After an arithmetic operation, the Status Register is updated to reflect information about
the result of the operation.
Program flow is provided by conditional and unconditional jump and call instructions,
able to directly address the whole address space. Most AVR instructions have a single
16-bit word format. Every program memory address contains a 16- or 32-bit instruction.
Program Flash memory space is divided in two sections, the Boot Program section and
the Application Program section. Both sections have dedicated Lock bits for write and
read/write protection. The SPM instruction that writes into the Application Flash memory
section must reside in the Boot Program section.
During interrupts and subroutine calls, the return address Program Counter (PC) is
stored on the Stack. The Stack is effectively allocated in the general data SRAM, and
consequently the Stack size is only limited by the total SRAM size and the usage of the
SRAM. All user programs must initialize the SP in the Reset routine (before subroutines
or interrupts are executed). The Stack Pointer (SP) is read/write accessible in the I/O
space. The data SRAM can easily be accessed through the five different addressing
modes supported in the AVR architecture.
The memory spaces in the AVR architecture are all linear and regular memory maps.
A flexible interrupt module has its control registers in the I/O space with an additional
Global Interrupt Enable bit in the Status Register. All interrupts have a separate
Interrupt Vector in the Interrupt Vector table. The interrupts have priority in accordance
with their Interrupt Vector position. The lower the Interrupt Vector address, the higher
the priority.
The I/O memory space contains 64 addresses for CPU peripheral functions as Control
Registers, SPI, and other I/O functions. The I/O Memory can be accessed directly, or as
the Data Space locations following those of the Register File, 0x20 - 0x5F. In addition,
the ATmega128RFA1 has Extended I/O space from 0x60 - 0x1FF in SRAM where only
the ST/STS/STD and LD/LDS/LDD instructions can be used.
7.3 ALU – Arithmetic Logic Unit
The high-performance AVR ALU operates in direct connection with all the 32 general
purpose working registers. Within a single clock cycle, arithmetic operations between
general purpose registers or between a register and an immediate are executed. The
ALU operations are divided into three main categories – arithmetic, logical, and bit
functions. Some implementations of the architecture also provide a powerful multiplier
supporting both signed/unsigned multiplication and fractional format. See the
“Instruction Set” section for a detailed description.
相關PDF資料
PDF描述
MC80C52CXXX-20/883D 8-BIT, MROM, 20 MHz, MICROCONTROLLER, CDIP40
MR80C52CXXX-25SB 8-BIT, MROM, 25 MHz, MICROCONTROLLER, CQCC44
MR80C52UXXX-25 8-BIT, MROM, 25 MHz, MICROCONTROLLER, CQCC44
IS80C32U-S 8-BIT, 20 MHz, MICROCONTROLLER, PQCC44
IV80C52UXXX-S 8-BIT, MROM, 20 MHz, MICROCONTROLLER, PQFP44
相關代理商/技術參數
參數描述
IT80F 制造商:未知廠家 制造商全稱:未知廠家 功能描述:TRIAC|50V V(DRM)|8A I(T)RMS|TO-220
IT80G 制造商:未知廠家 制造商全稱:未知廠家 功能描述:TRIAC|50V V(DRM)|8A I(T)RMS|TO-220
IT810B 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog IC
IT8152FG 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Specification|Errata_v0.1 for it8152fg_v0.3.4
IT8172G 制造商:未知廠家 制造商全稱:未知廠家 功能描述:RISC Companion Chip|Errata v0.2 for it8172g_v0.6
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*