參數資料
型號： IDT82P20516DBFG
廠商： IDT, Integrated Device Technology Inc
文件頁數： 53/115頁
文件大小： 0K
描述： IC LIU T1/E1/J1 16CH SH 484BGA
標準包裝： 84
功能： 線路接口單元（LIU）
接口： E1，J1，T1
電路數： 16
電源電壓： 1.8V, 3.3V
功率（瓦特）： 2.89W
工作溫度： -40°C ~ 85°C
安裝類型： 表面貼裝
封裝/外殼： 484-LFBGA
供應商設備封裝： 484-CABGA（19x19）
包裝： 托盤
包括： AIS 警報檢測器和發生器，回送功能，PRBS 發生器 / 檢測器，遠程檢測器和發生器
IDT82P20516
16-CHANNEL SHORT HAUL E1 LINE INTERFACE UNIT
Functional Description
42
December 17, 2009
3.5.7.3 Digital Loopback
The Digital Loopback can be configured manually or automatically.
Either manual Digital Loopback configuration or automatic Digital Loop-
back configuration will enable Digital Loopback.
Manual Digital Loopback is enabled by the DLP bit (b2, LOOP,...).
Automatic Digital Loopback is enabled when the pattern detection is
assigned in the transmit path (i.e., the PD_POS bit (b3, PD,...) is ‘1’) and
the AUTOLP bit (b3, LOOP,...) is ‘1’. The corresponding channel will
enter Digital Loopback when the activate IB code is detected in the
transmit path for more than 5.1 sec.; and will return from Digital Loop-
back when the deactivate IB code is detected in the transmit path for
more than 5.1 sec. Refer to section Inband Loopback (IB) Detection on
page 38 for details. When automatic Digital Loopback is active, setting
the AUTOLP bit (b3, LOOP,...) back to ‘0’ will also stop automatic Digital
Loopback. The setting of the PD_POS bit (b3, PD,...) should not be
changed during automatic Digital Loopback. The AUTOLP_S bit (b7,
STAT0,...) indicates the automatic Digital Loopback status.
In Digital Loopback mode, the data stream output from the TJA (if
enabled) is internally looped to the Decoder (if enabled). The data
stream to be transmitted is still output to the line side, while the data
stream received from the line side is covered by the Digital Loopback
data. However, LLOS and AIS detection in the receive path still monitors
the data stream received from the line side.
In Digital Loopback mode, the priority of the diagnostic facilities in the
receive path is: pattern generation > looped data; the priority of the diag-
nostic facilities in the transmit path is: pattern generation > looped data >
AIS generation. AIS generation is disabled in the receive path.
Figure-25 Priority Of Diagnostic Facilities During Digital Loopback
Tx path
BPV/CV, EXZ,
SLOS, AIS, pattern
detection
Pattern generation
Auto AIS
generation
Rx path
LLOS, AIS
detection
AIS generation
X
BPV/CV, EXZ,
AIS, pattern
detection
Pattern generation
Digital
Loopback
相關PDF資料
PDF描述
IDT82P2281PF TXRX T1/E1/J1 LONG/SHORT 80-TQFP
IDT82P2282PF TXRX T1/J1/E1 2CHAN 100-TQFP
IDT82P2284BB TXRX T1/J1/E1 4CHAN 208-PBGA
IDT82P2288BBG TXRX OCTAL T1/E1/J1 256-PBGA
IDT82P2521BHG IC LIU E1 21+1CH SHORT 640-PBGA
相關代理商/技術參數
參數描述
IDT82P20516DBFG8 制造商:Integrated Device Technology Inc 功能描述:IC LIU T1/E1/J1 16CH SH 484BGA
IDT82P20516DBFGBLANK 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:16-Channel Short Haul E1 Line Interface Unit
IDT82P2281 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:Single T1/E1/J1 Long Haul Short Haul Transceiver
IDT82P2281_09 制造商:IDT 制造商全稱:Integrated Device Technology 功能描述:Single T1/E1/J1 Long Haul / Short Haul Transceiver
IDT82P2281PF 功能描述:TXRX T1/E1/J1 LONG/SHORT 80-TQFP RoHS:否 類別:集成電路 (IC) >> 接口 - 驅動器，接收器，收發器 系列:- 標準包裝:250 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:3 V ~ 5.5 V 安裝類型:表面貼裝 封裝/外殼:16-TSSOP（0.173"，4.40mm 寬） 供應商設備封裝:16-TSSOP 包裝:帶卷 (TR)
發布緊急采購，3分鐘左右您將得到回復。

采購需求

(若只采購一條型號，填寫一行即可)

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

發布成功！您可以繼續發布采購。也可以進入我的后臺，查看報價

*型號 *數量 廠商 批號 封裝
添加更多采購

我的聯系方式

*
*
*